First is stock....

Take off top steering cover in the middle of the gauge cluster, remove the 2 torx screws , then unplug the three plugs behind the gauge cluster

Remove the two torx screws behind the cluster and pry out the 9 tabs around it and separate the cluster



Ahhhh the rings

2 rings installed

All rings installed

Cluster back together

Install in reverse order... plugging in the rear plugs was a PITA...

Ohhhhhh careful not to scratch the Rolex presidential.....thank god..

And the final pic

All in all well worth it. Glued the rings down with clear silicone adhesive... turned out great. 

Rings can be purchased at : http://www.intense-motorsports.com