Originally Posted by rjgardere12
(Post 25299235)
Just the single app within OBDEleven programmed both functions. Then I went into the MMI to activate the new settings.
|
Originally Posted by Moonlightblue
(Post 25300596)
The only setting I see to enable is the "Lower Windows with Long Press" setting. And then I can check off for the same for the sunroof.
|
Originally Posted by rjgardere12
(Post 25300781)
Are you referring to settings you see in the MMI or the OBDEleven App? I will try to look at mine tonight and take some pictures/screenshots.
|
Originally Posted by Moonlightblue
(Post 25303580)
referring to the settings I see in the MMI. Sorry if that wasn’t clear.
|
Originally Posted by Moonlightblue
(Post 25303580)
referring to the settings I see in the MMI. Sorry if that wasn’t clear.
https://cimg8.ibsrv.net/gimg/www.aud...eabb1aabf.jpeg https://cimg0.ibsrv.net/gimg/www.aud...9f9f74eb1.jpeg |
I used the Carista app as well. However I can only make the driver's side window go down. The long press lock can make all the windows and sun roof close. Did you do something different in the app?
Thanks, |
Originally Posted by rjgardere12
(Post 25304117)
Here are my MMI settings for the windows. It only shows "Long press to open windows" but it does do both open and close. I tried it after I took these photos just to make sure I wasn't crazy!
https://cimg8.ibsrv.net/gimg/www.aud...eabb1aabf.jpeg https://cimg0.ibsrv.net/gimg/www.aud...9f9f74eb1.jpeg |
Originally Posted by Moonlightblue
(Post 25304683)
Regarding the coding with OBDEleven Pro, are you using long press of unlock button on remote to open all the windows, and long press of lock button on remote to close all windows? (my issue is that I can't close them with long press of lock button.) My guess is that your'e able to do both because you have a pre-face lift model. I bet us post-facelifters can't raise windows with the remote if we used the OBDEleven app.
|
Obdeleven remote window
Originally Posted by HeCareth M. Wosu
(Post 25298887)
Just did mine with OBDEleven yesterday through the Long Coding options. Works similar like VCDS just a different interface.
|
All times are GMT -8. The time now is 10:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands