Took a bunch, will post this weekend. Need to resize them..

Fantastic .... cant wait to see em

PIC: Fusebox
 

<center><img src="http://pictureposter.audiworld.com/70909/fusebox.jpg"></center><p>

PIC: Loopadapter
 

<center><img src="http://pictureposter.audiworld.com/70909/loopadapter.jpg"></center><p>I plugged the connector that was plugged into this into the NAV instead of using the splitting method mentioned in the instructions.

PIC: Rack Bottom Screw
 

<center><img src="http://pictureposter.audiworld.com/70909/bottomscrew.jpg"></center><p>
All the other screws are easy because you can use a drill or a rachet, this one is tough because you have to do it manually, rachets don't fit. You may need to use you left hand to hold the back side of the bolt otherwise it turns in place instead of loosening up.

PIC: Rear Panel
 

<center><img src="http://pictureposter.audiworld.com/70909/rearpanel.jpg"></center><p>

PIC: Rear Panel Left Side
 

<center><img src="http://pictureposter.audiworld.com/70909/rearpanelleftside.jpg"></center><p>

Hey can you explain in more detail what you mean by where you put the antenna and maybe even a picture. I purchased the module on ebay and ordered the harness from kufatec and want to be informed before I begin the installation. Thanks a bunch