Koni rear sport shock install and mod to housing
I am going to install koni sports and seem to remember an article where the rear cover is modified to allow access to the damper adjustment **** (on the rear koni damper). Does anyone have a link to it?
it involved cutting a slot into the original cover/housing, so the allen wrench can reach into the adjustment dial at the top of the damper.
thanks
dave
http://www.stasisengineering.com/Cat...&VID=94&PID=76
(if that doesnt work, I selected my car from the parts menu, and then suspension, and then Street Sport Suspension)
upper right corner above the pix for their "Street Sport Suspension" is a button called "how to install"
in the PDF on page 7 it shows the slot. Doesnt really give dimensions, you'll have to measure those yourself..
FWIW, I did not do this mod. Since the fronts have to come off anyway to be adjusted, wasnt sure I wanted to slice into the rear covers to save a couple hours of adjusting. If the fronts were adjustable on car I probably would have looked at this a bit more to determine if it was something I wanted to do.
dave




