Starting AWE boost guage install and already hung at light switch removal
Thread Starter
New Member
Joined: Jun 2001
Posts: 341
Likes: 0
Starting AWE boost guage install and already hung at light switch removal
Instructions say to push in switch while turning clockwise, did that,1. push, 2. turn, it turns a very short distance and click stops dead and parking lights come on. Try as hard as I can I can't push the switch in and turn it past a very short distance without the parking lights coming on. If I pull on it, it acts like the whole assembly, dimmer switch, and plastic cover panel are coming out. any body done this with success?
Thread Starter
New Member
Joined: Jun 2001
Posts: 341
Likes: 0
Damned if I can tell Jeff. That's the second step
after that remove fuse panel cover and under side dash cover, route hose into engine ......etc. finally after install then for wiring it looks like the wiring is attached to inside the fuse panel for both common and hot leads why the light switch is removed is baffling, and frustrating as well.
Trending Topics
AudiWorld Stories
Bringing Audi to Life for Audi Fans
10 Strangest Audi Designs That Actually Made Production
Joe Kucinski
2027 Audi Q7 and SQ7: Audi Upgraded EVERYTHING!
Michael S. Palmer
Audi Unveils Absurdly Cool New Supercar: 10 Things You Need to Know!
Verdad Gallardo
The Highs & Lows of Every Audi C-Class Generation
Joe Kucinski
Top 10 Most Expensive Audis Ever Sold on Bring-A-Trailer
Brett Foote
10 Audi Features & Options We Miss the Most!
Joe Kucinski
Audi Recreates Crazy-Looking Speed Record Breaker From 1935
Verdad Gallardo
Coachbuilder Recreates the 1995 Audi TTS Concept
Verdad Gallardo
Every Audi V10 Car Ranked!
Joe Kucinski
Thread Starter
New Member
Joined: Jun 2001
Posts: 341
Likes: 0
Will do, I'll wait till morning with good light to remove the torx
bolts, and drop the lower dash cover or given my success tonight, I'll lose one of the bolts, or better yet, poke a hole in something..