Busy brake day - check it out!
Thread Starter
New Member
Joined: Apr 2004
Posts: 292
Likes: 0
Busy brake day - check it out!
<center><img src="http://pictureposter.audiworld.com/74560/imgp0858.jpg"></center><p>Well, 5 hours later and a few bloody fingers I finished my first rotor and pad job. Swapped OEM for Zimmerman x/driled + slotted and porterfield pads.
Big thanks to Jeff Bipes and everyone else who has posted info regarding brake jobs on this forum. All of this info was invaluable to the succesfull completion of this job.
For anyone who has never done it and is thinking about attemping it - it is doable by a rookie. Use JBipes directions and be patient. Give youself a lot of time and it'll happen.
I'll post thoughts on the pad / rotor set-up after break in period.
THANKS AGAIN!
Big thanks to Jeff Bipes and everyone else who has posted info regarding brake jobs on this forum. All of this info was invaluable to the succesfull completion of this job.
For anyone who has never done it and is thinking about attemping it - it is doable by a rookie. Use JBipes directions and be patient. Give youself a lot of time and it'll happen.
I'll post thoughts on the pad / rotor set-up after break in period.
THANKS AGAIN!
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Timewise
A6 / S6 (C5 Platform) Discussion
13
Jan 25, 2008 07:11 AM
SpeedyDTP247 CQ+UrS4
A4 (B5 Platform) Discussion
0
Jul 7, 2005 12:49 PM
