Axis supermesh

Reply Subscribe

Thread Tools

Search this Thread

Nov 9, 2004 | 03:30 PM

TTington

Thread Starter

AudiWorld Senior Member

Joined: Sep 2004

Posts: 727

Likes: 0

Axis supermesh

Does anyone know what bolts I would need for my axis supermesh if i have 15mm front and 25mm rear spacers.

Nov 9, 2004 | 05:16 PM

CdnTT

AudiWorld Senior Member

Joined: Apr 2002

Posts: 1,971

Likes: 0

did you get your wheels?

do you need rear spacers on the 9.5" rears????

Nov 9, 2004 | 10:00 PM

jayel

AudiWorld Super User

Joined: Oct 2001

Posts: 4,961

Likes: 0

the stock bolt length is 28mm

just add 28mm to the size spacer you have and that's it!

btw, you would need conical bolts

Nov 10, 2004 | 02:49 AM

OddOrEven

New Member

Joined: Oct 2004

Posts: 74

Likes: 0

Re: Axis supermesh

I went with 47 mm taper bolts with the 15 mm spacers. Alot of people seem to be using 43 mm and I tried these initially but with my wheels 43 mm was a little short. My earlier post (run a search on "lugbolts") from a few days ago show a pic of the lugbolts and Steve shows his 43 mm. Run a search on "lugbolts". You can see the difference in the amount of lugbolt in the hub is less than the stock.

25 mm spacers use oem 28mm bolts without a problem since the lugbolt threads into the spacer.

Note this is for H&R spacers, can't speak for others but should be the same.