Airbag Ignitor
I know it takes significant current to generate enough heat to deploy. My logical mind says it would be okay for a short duration, but never have done this, so I thought I would ask.
Chasing a "Resistance to High" problem on both the drivers and passengers side airbags. The plug on the drivers side is connected and the passengers has been spliced together. Previous Owner!
I have accessed the ABS module and will shoot the wires to the seat. I read measuring blocks and all others are okay.
Thanks for the help!
When i replaced my seats, jumpered a 4.7 Ohm resistor across the side bag terminals to "fool" the system...FWIW..
Doublecheck that splice too
By the way if you can guarantee the delivery person I would be inclined to make an early purchase!! What can Brown do for me!!





