Scangauge remounted
Thread Starter
AudiWorld Super User
Joined: Jul 2005
Posts: 6,599
Likes: 0
Scangauge remounted
Like a lot of us this weekend I'm trying to finish up the prep for TT-East. I've always been dissatisfied with my initial Scangauge mounting as there were exposed wires that wouldn't allow me to close the dash cubby. I went in this morning and did a little cutting, drilling, crimping, gluing, and tucking. It's a permanent means of installing the device cable, but worth the refound aesthetic. Nothing too technical about this so I didn't feel the need for an entire write-up. Tools were a drill, some torx bits, and an RJ-45 crimper.
FWIW, I was interrupted during my install and had to make a side trip without the gauge in place...I felt naked...this is a real "must have" device. Not quite a Vag-com or a Liquid TT...but resetting CEL's on the fly is just TOO sweet.
Drilled a diameter to allow cable passage...
<img src="http://images40.fotki.com/v1251/photos/8/892866/4632701/DSC01105-vi.jpg">
Cleaner Results...
<img src="http://images41.fotki.com/v1253/photos/8/892866/4632701/DSC01115-vi.jpg">
FWIW, I was interrupted during my install and had to make a side trip without the gauge in place...I felt naked...this is a real "must have" device. Not quite a Vag-com or a Liquid TT...but resetting CEL's on the fly is just TOO sweet.
Drilled a diameter to allow cable passage...
<img src="http://images40.fotki.com/v1251/photos/8/892866/4632701/DSC01105-vi.jpg">
Cleaner Results...
<img src="http://images41.fotki.com/v1253/photos/8/892866/4632701/DSC01115-vi.jpg">
AudiWorld Uber User
Joined: Dec 2000
Posts: 53,281
Likes: 2
Nice floor mats!....>
and mount job Peter...grabbed that second shot for the album...
You're right about being Nakid... Without my IAT's, fuel trims, and water temps up all the time I feel like I'm totally in the dark!
You're right about being Nakid... Without my IAT's, fuel trims, and water temps up all the time I feel like I'm totally in the dark!
Thread
Thread Starter
Forum
Replies
Last Post
DynomiteTT
TT (Mk1) Discussion
9
Feb 20, 2007 11:50 PM
cathar
A4 (B6 Platform) Discussion
5
Feb 9, 2006 08:12 AM
hoTTub
TT (Mk1) Discussion
20
Feb 16, 2004 06:00 PM
