Q7 Oil Cooler removel 3.6L Engine
Thread Starter
AudiWorld Newcomer
Joined: Feb 2022
Posts: 1
Likes: 1
Q7 Oil Cooler removel 3.6L Engine
This is my first time posting on this form but I've been watching it for many years. I'm looking at the configuration on how the oil cooler is installed. The service manual is telling me to remove the engine support brace on the driver side and remove the entire oil filter housing.
I'm just looking for advice on anyone that's done this project and what I'm going to be running myself into. My speculation is to remove the will Cooler cap remove the nut and turn the oil cooler so I can get to the back clamp on the antifreeze line. And then just remove it , But in hindsight I'm looking at upper and lower antifreeze hoses and a few other things that are in the way. Any suggestions would be nice
I'm just looking for advice on anyone that's done this project and what I'm going to be running myself into. My speculation is to remove the will Cooler cap remove the nut and turn the oil cooler so I can get to the back clamp on the antifreeze line. And then just remove it , But in hindsight I'm looking at upper and lower antifreeze hoses and a few other things that are in the way. Any suggestions would be nice
Thread
Thread Starter
Forum
Replies
Last Post
silvers4sd
S4 / RS4 (B5 Platform) Discussion
8
Oct 25, 2007 08:39 PM
