Will my 18"x8.5" IWC Quicksilvers fit flush with the A4 body? Will I have to roll the fender?
Thread Starter
New Member
Joined: Sep 2000
Posts: 29
Likes: 0
Will my 18"x8.5" IWC Quicksilvers fit flush with the A4 body? Will I have to roll the fender?
RPI told me that the 18"x8.5" will fit flush. But some other people told me that the 8.5" width will stick out. I don't know what to believe. I certantly don't want the look of the tires pouring out of the car like those ghetto mobiles that you see in the bad neighborhoods, if you get me drift. What I want is when I look directly at the front I don't want to be able the tires to be showing out the sides, hence the flushness. There is no off set though, they are flat rims. Please let me know. Thanks. I also must say that AudiWorld is the best site ever and it is so because of you guys that respond so quickly so once again THANKS!
-Dave
-Dave
Elder Member
Joined: Mar 2000
Posts: 17,125
Likes: 1
they are pretty much flush (URL to some photos)
as i recall, the back wheels fit just about flush with the edge of the wheelwell. the fronts stick out a little, but it's certainly nothing ghettoish. i've got some pictures of them scattered about at the link below.<ul><li><a href="http://truffula.com/~meem/s4/">iwc quicksilvers on nogaro s4</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
LewTurboB5A4
A4 (B5 Platform) Discussion
9
Jun 3, 2008 11:13 AM
Saturnine
A4 (B5 Platform) Discussion
1
Dec 3, 2001 01:07 PM
eisenbarth
A4 (B5 Platform) Discussion
15
Nov 2, 2001 02:02 PM
