johnnyd112

How much extra does each of your signatures on a car cost?

Don Nguyen

When you've done as many various cars as I have, you'd be surprised at how often people try to use and steal my pictures as their own. I've seen a picture of a car I've worked on, used on an eBay ad. I was sure it was one of my pictures, because I was in the reflection in the glass of the car. Haha

johnnyd112

Haha lotta Carfishers out there. Ha..no I hear ya and just messing around dude.

Good work.

Don Nguyen

I’ve had requests from people to post some more pictures of interiors that I’ve done. This is on a BMW F10 5 series sedan that originally had brushed aluminum/silver trim accents in the car. The interior trim on this car is different than most other cars, since the interior trim pieces have an edging around the trim pieces, which you can see that I left unwrapped in the pictures. Also, most interiors I’ve done in the past were with the 3M dinoc matte carbon fiber material, however, the owner of this car wanted me a finish that was slightly glossier and blacker, so we went with with the 3M 1080 gloss carbon fiber finish. In addition to his interior trim, I also did his rear bumper diffuser piece in the same material. The owner of this car was from Pomona and drove out to me in Anaheim Hills, Orange County to have the work done.

Before:


After:


















-Don Nguyen

donathon@gmail.com

Don Nguyen

Typically people have me lightly tint/smoke their tail lights with my film, but the owner of this white Audi A4 sedan had me light smoke/tint his head lights instead. The tint is actually fairly light, so it doesn’t affect the light output from the head lights onto the road by any significant amount. I’ve done this for several cars in the past, and most owners have reported to me that the light output was fairly the same or any light output difference was fairly insignificant from their perspective in the car. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. In addition, having the film on the headlights will protect it from rock chips and also fading/hazing that typically happens to head lights over time.

Before:




Passenger left side - stock :: Driver/right side - Tinted/smoked


After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

For those who are keep track, I may be making my last norcal trip for the year either the first or second week of September. I haven’t finalized it, but once I do, I’ll make an official thread for it. However, those who e-mail me ahead of time will get priority registration for setting up appointment times with me.

The owner of this brand new white Mercedes Benz E250 sedan had me wrap his roof in my gloss black vinyl material and also black out the chrome/brushed aluminum window trim in the same finish to match. I would have also done the rear trunk bar chrome piece to match, but the owner of this car wanted to leave it I believe. The black roof and blacked out window trim sets it off from the other E classes on the road, but without making it look too modified. It’s a very factory look, in my opinion.


Before:




After:












-Don Nguyen

donathon@gmail.com

Don Nguyen

Here's a white Audi B8 that I vinyl wrapped the roof, hood, and bumper in my matte black finish/material. The owner of this car wanted to continue the theme down from the roof to the center raised section of the hood and the center section of the bumper. I thought it looked pretty cool, and it actually ended up making the car look wider. The owner of this car was in San Diego, and I happened to be down there in the area already from Orange County, so I dropped by and did some work on his car.

















-Don Nguyen

donathon@gmail.com

Don Nguyen

Here are some pictures of an Audi A4 B8 that I lightly tinted/smoked the tail lights on for the owner of this car. The owner of this car also had me cut the clear portion of his reverse lights out on his tail lights. The lights may appear slightly darker in these pictures, but I only use a light shade when tinting tail lights, to give the cars a factory or OEM+ look as I would call it. Typically on lighter colored cars, the tail lights may appear slightly darker vs darker colored cars due to the contrast.











-Don Nguyen

donathon@gmail.com

Don Nguyen

This black Audi A4 B8 came by to have me black out the chrome / brushed aluminum window trim that came with his car. The owner of this car was also around in Orange County and came out to me in Anaheim Hills to get the work done. In the before pictures, you can see my X5 in the background with black window trim, so that may also kind of give you an idea of how chrome and non chrome window trim looks like side by side on black cars. For this car, we went with my gloss black vinyl material over the matte black material and I think it turned out fairly nice. The car had a metallic finish to it, so the gloss black still stood out against it even though it was gloss black as well.

Before:






After:
















-Don Nguyen

donathon@gmail.com

Don Nguyen

Here is a brand new white Audi B8 A4 that I blacked out the chrome / brushed aluminum window trim with my gloss black material. The owner of this car went with gloss black over the matte black so it'd blend in with his tinted windows. The chrome is a small detail, but even on a lighter colored car like this white Audi, it still makes an immense difference in the overall look of the car. I believe the owner of this car was from around Orange County or Los Angeles. The gloss black window trim makes the car look sportier and classy at the same time, without ruining the factory look.

Before:




After:










-Don Nguyen

donathon@gmail.com