schiu

I got the adapter from ebay but it only has 4 wires instead of 5. The two black wires are joined together. Does it matter and where shall i put the black wire ( pin 15 or 19)

ltooz_a6_a8_q7

All the 1's go together and all the 2's go together.


Cheers,

<a href="http://www.dognmonkey.com/audi/watch-atsc-ota-tv-on-mmi-2g.html">Louis</a>

schiu

Thanks for your reply. Is yours also 4 wires.So one common ground wire for audio and video is ok and doesn't matter which pin 15 or 19 i use

Giovanni Giovino 6.0+6.0TT

I am sure you meant Kufatec, that four wire is not from Kufatec, you could try it but I think that you would have to add a black jumper so both pins 15 and 19 get ground, but you may end up with interference, you should just order the correct part as shown in link.






https://www.kufatec.de/shop/en/audi/...in?action_ms=1




.

Giovanni Giovino 6.0+6.0TT

PIN-configurations:


Video/Audio input 1


PIN 09 – Shield Audio left/right
PIN 10 – Audio signal white, left
PIN 11 – Audio signal red, right
PIN 12 – Video signal gelb
PIN 13 - Video/ Shield



Video/Audio input 2


PIN 15 – Shield Audio left/right 2
PIN 16 – Audio signal white, left 2
PIN 17 – Audio signal red, right
PIN 18 – Video signal 2
PIN 19 – Video/ Shield


Video output (only for Hybrid-Tuner):

PIN 4 – Video Shield
PIN 5 – Video signal
PIN 6 – Audio Shield
PIN 7 – Audio left
PIN 8 – Audio right