WTB: Audi 90 B4 FWD parts
#1
AudiWorld Member
Thread Starter
Join Date: Apr 2009
Location: Pittsburgh, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Audi 90 B4 FWD parts
Anyone in the pacific states (Cali. Az, NV, etc.) have access to any B4 parts?
Looking for brake backing plates--all 4,; hubs--all 4,; calipers-all 4-; front lower control arms. Don't care about the bushings or ball joints in the control arms, plan to replace them anyway. Prefer usable bearings in the hubs. Also, if the hubs have ABS sensors installed, I'll need these as well.
This is all for a FWD car, 1993--but all B4 may use the same parts. I may think of something more. A while back a member named Greg helped me on a subframe for a 95 quattro, but I suspect he may not be a regular here anymore.
Thanks!
Looking for brake backing plates--all 4,; hubs--all 4,; calipers-all 4-; front lower control arms. Don't care about the bushings or ball joints in the control arms, plan to replace them anyway. Prefer usable bearings in the hubs. Also, if the hubs have ABS sensors installed, I'll need these as well.
This is all for a FWD car, 1993--but all B4 may use the same parts. I may think of something more. A while back a member named Greg helped me on a subframe for a 95 quattro, but I suspect he may not be a regular here anymore.
Thanks!
#3
AudiWorld Member
Thread Starter
Join Date: Apr 2009
Location: Pittsburgh, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
I have two of these, the 95Q is the daily driver.
I've had a 93CS sitting for a few years now, I just started working on it. This one is a PA car so the body is fine, but everything attached to it on the underside is scaly. I'd rather get clean parts than sand and paint what I have.
Send me a PM and let me know if you are pulling these from a car, what you'll need cost-wise get for them, and yes, will be shipped but most of this stuff is small enough to fit in USPS priority boxes. The shipping will be what it will be.
If this stuff is all still on a car, all the better b/c the nuts, bolts, hardware, etc. will be there. and I'll need that. Thanks!
I've had a 93CS sitting for a few years now, I just started working on it. This one is a PA car so the body is fine, but everything attached to it on the underside is scaly. I'd rather get clean parts than sand and paint what I have.
Send me a PM and let me know if you are pulling these from a car, what you'll need cost-wise get for them, and yes, will be shipped but most of this stuff is small enough to fit in USPS priority boxes. The shipping will be what it will be.
If this stuff is all still on a car, all the better b/c the nuts, bolts, hardware, etc. will be there. and I'll need that. Thanks!
Trending Topics
#10
AudiWorld Super User
Join Date: Feb 2004
Location: Canada (NCR)
Posts: 7,677
Likes: 0
Received 0 Likes
on
0 Posts
I have these for you..
<a href="http://photobucket.com/" target="_blank"><img src="http://i4.photobucket.com/albums/y145/pharoah007/B4%20Audi%20pics/IMG_20141101_183151_zpsdzrbroks.jpg" border="0" alt=" photo IMG_20141101_183151_zpsdzrbroks.jpg"/></a>
shoot me a email if interested.
<a href="http://photobucket.com/" target="_blank"><img src="http://i4.photobucket.com/albums/y145/pharoah007/B4%20Audi%20pics/IMG_20141101_183151_zpsdzrbroks.jpg" border="0" alt=" photo IMG_20141101_183151_zpsdzrbroks.jpg"/></a>
shoot me a email if interested.
Thread
Thread Starter
Forum
Replies
Last Post
bballfreak
A6 / S6 (C6 Platform) Discussion
9
04-14-2019 06:59 PM
lmariorod
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
7
10-26-2017 11:39 AM
gruvenparts.com
A4 (B5 Platform) Discussion
19
10-11-2016 04:47 AM
Monsoonenough
S4 (B8 Platform) Discussion
3
10-03-2015 02:59 PM