Remove front license plate panel/filler plate?
#2
From the pics on ECS Tuning site, it appears to snap into place. To remove, you'll need access from behind the grille to undo the clips.
<a href="http://www.ecstuning.com/Audi-A3-Quattro-2.0T/Exterior/Body/ES262966/#">2009+ front plate filler</a>
2008 and earlier are easier to install/remove. Held on with plastic tabs up top and couple of screws on the bottom.
<a href="http://www.ecstuning.com/Audi-A3-Quattro-2.0T/Exterior/Body/ES262966/#">2009+ front plate filler</a>
2008 and earlier are easier to install/remove. Held on with plastic tabs up top and couple of screws on the bottom.
#3
From the pics on ECS Tuning site, it appears to snap into place. To remove, you'll need access from behind the grille to undo the clips.
<a href="http://www.ecstuning.com/Audi-A3-Quattro-2.0T/Exterior/Body/ES262966/#">2009+ front plate filler</a>
2008 and earlier are easier to install/remove. Held on with plastic tabs up top and couple of screws on the bottom.
<a href="http://www.ecstuning.com/Audi-A3-Quattro-2.0T/Exterior/Body/ES262966/#">2009+ front plate filler</a>
2008 and earlier are easier to install/remove. Held on with plastic tabs up top and couple of screws on the bottom.
http://www.ecstuning.com/Audi-A3-Qua...ille/ES457290/
Last edited by MikeSS; 02-17-2012 at 02:26 PM.
#4
Thanks much. It also appears to me that access from the rear is necessary. Do you (or anyone else) know how to gain access? Does the upper portion of the grill have to be removed to get to the clips?
Thanks again.
Thanks again.
From the pics on ECS Tuning site, it appears to snap into place. To remove, you'll need access from behind the grille to undo the clips.
<a href="http://www.ecstuning.com/Audi-A3-Quattro-2.0T/Exterior/Body/ES262966/#">2009+ front plate filler</a>
2008 and earlier are easier to install/remove. Held on with plastic tabs up top and couple of screws on the bottom.
<a href="http://www.ecstuning.com/Audi-A3-Quattro-2.0T/Exterior/Body/ES262966/#">2009+ front plate filler</a>
2008 and earlier are easier to install/remove. Held on with plastic tabs up top and couple of screws on the bottom.
#5
#6
TIA
Trending Topics
#8
#10
meh nevermind my last. From what i gather this thread was asking how to replace it with the filler. i want to remove it all together so its just the grill with no license holder or filler plate. If you were to remove the filler plate would it be a clean grill underneath?