abhizen

When I shift to reverse, the front and rear camera do not show the pic, only a car image is displayed with sensor indicating of any obstacles... Anyone knows what could be the issue? Reading through other threads I am thinking its the Fuse. But unable to get to the fuse location in my Q7. Audi manual says it located at back under luggage but cant see the Fuse number mentioned for Front/Rear Camera. I cant go to dealer hence looking for fix on my wn. Any pointer will be appreciated..

SYMAWD

When the parking system is active, click on the right control button, then change it from graphic to camera.

abhizen

It does not show me the option to change from graphic to camera.

Jim Herrod

The auto-changing box needs to be checked. I think you can only change it if the vehicle is in Park.

abhizen

The check box is disabled even when inP (Park) mode.

PROEDGEBIKER.COM

try resetting the MMI

abhizen

I did that by pressing 2 silver ***** and the black round **** at once, but didn't resolve.

owens

Our Q7 is presently in the shop with a similar problem, non of the cameras were working. The dealer has replaced a module, but is having trouble calibrating the camera system. The shop manager says this is very complicated, and involves use of various mirrors. The vehicle has been in the shop four days now, hopefully will be completed today.

abhizen

Thanks Owens. My Q7 is 7 months old, do you know if is covered in warranrty or you have to pay from your pocket?

BigKutta

If you are in the US, you have warranty until 4 years or 50k miles. Anywhere else, you would have at least 1 year i'm guessing