i down loaded the beta version so i could see how the long code helper works. Everything ran well..
05-08-2008, 05:58 AM
#1
AudiWorld Senior Member
Thread Starter
Join Date: May 2006
Location: Bergen County, NJ
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
i down loaded the beta version so i could see how the long code helper works. Everything ran well..
but i still do see the button to run the long code helper. IS there another program i need to install? Does v704 use the long code helper?
05-08-2008, 06:38 AM
#6
Audiworld Premium Sponsor
Join Date: Mar 2002
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Select->CAN Gateway->Coding->Long Coding Helper
<center><img src="http://www.ross-tech.com/vag-com/tour/704-screens/coding-long.png"></center><p>
Again, this only applies to controllers that use Long Coding (not all of the ones in your car do).<ul><li><a href="http://www.ross-tech.com/vag-com/tour/recode_screen.html">http://www.ross-tech.com/vag-com/tour/recode_screen.html</a</li></ul>
Again, this only applies to controllers that use Long Coding (not all of the ones in your car do).<ul><li><a href="http://www.ross-tech.com/vag-com/tour/recode_screen.html">http://www.ross-tech.com/vag-com/tour/recode_screen.html</a</li></ul>
__________________
Andy
Andy
Trending Topics
05-12-2008, 10:10 AM
#9
AudiWorld Senior Member
Thread Starter
Join Date: May 2006
Location: Bergen County, NJ
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Well i was just following some programming steps and some said use the long code helper button
and I didnt see it on the version i was using