Rear view camera mystery
02-06-2016, 01:07 PM
#1
AudiWorld Member
Thread Starter
Join Date: Jul 2010
Location: North Carolina
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Rear view camera mystery
I made a few VCDS changes today and now the "virtual car" image has disappeared in MMI when I place it in reverse. I still have the parking sensor icons but no "virtual car." The only thing I can think of is that somewhere in the depths of VCDS I saw that a box was checked that identified my car as an A7, not an A6, and I changed it to A6. Can't imagine that would have done it. Any ideas? 
02-07-2016, 04:43 PM
#2
AudiWorld Member
tutone:
If I am repeating old news, then my apologies in advance.
Assuming you have a relatively recent version of VCDS, I suggest you check the Codinglog.txt file, in the Ross Tech >VCDS>Debug directory of the laptop you use for VCDS. It has a record of all changes you have made, and is handy in cases like this where you need to review the items that have been tweaked.
If I am repeating old news, then my apologies in advance.
Assuming you have a relatively recent version of VCDS, I suggest you check the Codinglog.txt file, in the Ross Tech >VCDS>Debug directory of the laptop you use for VCDS. It has a record of all changes you have made, and is handy in cases like this where you need to review the items that have been tweaked.
02-08-2016, 09:13 AM
#3
AudiWorld Member
Thread Starter
Join Date: Jul 2010
Location: North Carolina
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I will check it out. Thanks!
tutone:
If I am repeating old news, then my apologies in advance.
Assuming you have a relatively recent version of VCDS, I suggest you check the Codinglog.txt file, in the Ross Tech >VCDS>Debug directory of the laptop you use for VCDS. It has a record of all changes you have made, and is handy in cases like this where you need to review the items that have been tweaked.
If I am repeating old news, then my apologies in advance.
Assuming you have a relatively recent version of VCDS, I suggest you check the Codinglog.txt file, in the Ross Tech >VCDS>Debug directory of the laptop you use for VCDS. It has a record of all changes you have made, and is handy in cases like this where you need to review the items that have been tweaked.
Thread
Thread Starter
Forum
Replies
Last Post
kblade
A6 / S6 (C6 Platform) Discussion
1
05-15-2011 07:10 PM
triplecore
A6 / S6 (C6 Platform) Discussion
13
12-07-2009 06:22 AM
Kresimir
A6 / S6 (C6 Platform) Discussion
1
12-24-2007 11:39 AM
Orangeblood
S4 (B6 & B7 Platforms) Discussion
0
07-16-2004 08:52 AM