Theresias

You could try something else too, what's your current value in MMI (#07) adaptation channel 002?

mksap11

current value: 3

Theresias

Hmm... sorry, then my idea doesn't work with US models.

mksap11

Do you happen to know the Part number of the fiber optic loop/jumper? I've STFA'd w/o much luck

mksap11

Thanks anyway!

Theresias

i.e. just go from the module "before" (navigation) directly to the module "after" (can-gateway).

Uwe@Ross-Tech.com

Given what I've seen in the trunk of an A6, I'm not sure that's as straightforward as it sounds.

-Uwe-

mksap11

The Satellite Module (or "model" ;-) is #6. Just to confirm, the rough procedure would essentially be..

1) Disconnect/remove Sat module
2) Connect #5 (J507 Speech input module) directly to #7 (J401 Nav Unit)
3) Recode the CAN gateway to remove the Sat module

Am I missing anything? Thanks. -mike

<img src="http://i11.tinypic.com/2uj75z9.png">

Uwe@Ross-Tech.com

that those optical lines are paired in a single connector at each module:

<img src="http://www.ross-tech.net/vag-com/misc-images/MOST-Connector.jpg">\

So you'll need to pull that connector from two of the modules, remove one of the pair of lines from each connector, then re-insert the correct line one into the connector that you're keeping.

-Uwe-

mksap11

Thanks for picture and explanation. I found the procedure in the Bentley for servicing/separating the fiber-optic connectors. While it looks pretty straightforward and I have some experience working around fiber optics at work, I guess I'll need to take apart the rear luggage compartment first to see how all the lines are run before I dive into it. Again, thanks for all your (and Sebastian's) help.