fast4door

Hey guys,

I have a 1997 A4 1.8T Quattro with an Auto Tranny. Recently i;ve noticed late/delayed shifting between gears. I ran VAG COM on my and the only thing out of place was that my software coding for the automatic transmission seems says 00000. Has anyone dealt with this before or have any ideas on proper coding for the auto transmission software.

any help will be appreciated.

Theresias

So what tranny do you have? 01V? 00000 is a valid coding for a couple of trannys.

fast4door

HERE ARE THE VAG COM RESULTS... THE MAIN THING I'M TRYING TO FIGURE OUT IS WHAT "18089 - Control Module Programming Not Finished" CODE MEANS.... ANY CLUES?

________________________________________________

Chassis Type: 8D - Audi A4 B5
Scan: 01 02 03 08 15 16 17 25 35 37 45 55 56 57 67 75 76 77

-------------------------------------------------------------------------------
Address 01: Engine
Part No: 8D0 907 557 N
Component: 1.8L R4/5VT MOTR AT D05
Coding: 06251
Shop #: WSC 03008

1 Fault Found:
18089 - Control Module Programming Not Finished
P1681 - 35-00 - -
Readiness: 0110 0101

-------------------------------------------------------------------------------
Address 02: Auto Trans
Part No: 8D0 927 156 T
Component: AG5 01V 1.8lR4T US D06
Coding: 00000
Shop #: WSC 03008

1 Fault Found:
00526 - Brake Light Switch-F
27-00 - Implausible Signal

-------------------------------------------------------------------------------
Address 03: ABS Brakes
Part No: 4D0 907 379 L
Component: ABS/EDS BOSCH 5 4171

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC
Part No: 8L0 820 043 B
Component: A4 KLIMAVOLLAUTOMAT_D73
Coding: 04140
Shop #: WSC 03008

No fault code found.