I've made my decision on lower door moldings
Thread Starter
AudiWorld Senior Member
Joined: Mar 2000
Posts: 670
Likes: 0
I've made my decision on lower door moldings
Sometime in the future, I'll spring for the S4 side skirts kit, but I can't afford that this summer. So, I'm going to just order the OEM door molding and try to install myself. I hope it's not too difficult!
I've pulled off the most rust out one and I'm left with just the white clips (which appear in good shape) and some black piece at the door end where the screw is. If I get the pieces at the dealer, is it as simple as snapping the pieces on the white plastic clips? And do I leave that piece that is screwed onto the door?
I tried German Auto Parts online, they didn't have these pieces, does Clair?
Thanks for any insights!
I've pulled off the most rust out one and I'm left with just the white clips (which appear in good shape) and some black piece at the door end where the screw is. If I get the pieces at the dealer, is it as simple as snapping the pieces on the white plastic clips? And do I leave that piece that is screwed onto the door?
I tried German Auto Parts online, they didn't have these pieces, does Clair?
Thanks for any insights!
Thread
Thread Starter
Forum
Replies
Last Post
MonkeyLover
A4 (B5 Platform) Discussion
7
Feb 29, 2008 10:42 AM
SCarGo02
Audi 90 / 80 / Coupe quattro / Cabriolet
6
May 11, 2006 05:17 PM
xdriver
A4 (B5 Platform) Discussion
4
Mar 24, 2006 01:20 PM
big_anthoiny
Audi 90 / 80 / Coupe quattro / Cabriolet
18
Nov 5, 2005 10:36 AM
A4_THOR
A4 (B5 Platform) Discussion
12
May 24, 2004 09:06 PM
