just installed a hybrid k03 in a 2000 A4. this was from buehn engineering/imolavirus

Reply Subscribe

Thread Tools

Search this Thread

Feb 20, 2005 | 08:35 PM

~~Mike@VAST~~

Thread Starter

Banned

Joined: Jul 2001

Posts: 19,471

Likes: 0

just installed a hybrid k03 in a 2000 A4. this was from buehn engineering/imolavirus

this is a k04 exhaust wheel and k16 compressor wheel. the inlet to the turbo was opened up 4-5mm to fit the larger compressor wheel. if you need anymore info, like pricing or more things to do to the hybrid turbo, it's best to ask Jacob Buehn/Imolavirus: imolavirus@gmail.com

<img src="http://tychl.txf.com/~mshimon/prince_k04_k16_1.JPG">

<img src="http://tychl.txf.com/~mshimon/prince_k04_k16_2.JPG">

<img src="http://tychl.txf.com/~mshimon/prince_k04_k16_3.JPG">

Feb 20, 2005 | 09:39 PM

CURSH

AudiWorld Super User

Joined: Jul 2004

Posts: 21,199

Likes: 2

From: Phoenix AZ

What numbers are you hoping to run?

I read up on it a while back, but I cant remember anything about it.

Feb 20, 2005 | 10:46 PM

Enclave

AudiWorld Senior Member

Joined: Jan 2004

Posts: 1,015

Likes: 0

Isnt this a Tribrid becuase you are using k03,k04,k16 parts?

Feb 20, 2005 | 11:18 PM

~~Mike@VAST~~

Thread Starter

Banned

Joined: Jul 2001

Posts: 19,471

Likes: 0

hoping for a mid 200crank hp, most likely on race gas...his other mods:

i made him a phenolic intake mani spacer, wrapped test pipe, 510cc/min injectors, 3" maf, open element intake, mbc, tcd, efk, lwfw, spec ceramic clutch, giac k04 chip. stock smic for now. stock catback as well. alot of the things he's doing is in preparation for an even bigger turbo one day. it's been a slow process so far.