Stage III install in progress...
Thread Starter
AudiWorld Member
Joined: Jan 2001
Posts: 477
Likes: 0
Stage III install in progress...
Im having some trouble getting the oil line that wraps around the engine block removed. I have removed the two screws that hold it to the side above the turbo, as well as one nut that is directly behind the block. Are there any more holding on the line that need to be removed? Also, is the other end of this oil-line at the top of the oil cooler? TIA
AudiWorld Senior Member
Joined: Mar 2000
Posts: 1,970
Likes: 0
Re: Stage III install in progress...
I dont know if there are other bolts holding the line that you didnt mention but, the other side of the oil line does end up right above the oil filter. I would recommend removing the coolant reservour (3 screws) and just push it aside so you can easily access the oil line fittings...
Good luck in your install..
Good luck in your install..
Thread
Thread Starter
Forum
Replies
Last Post
davenew
S4 / RS4 (B5 Platform) Discussion
8
Nov 15, 2004 08:15 AM
zszabo
A4 (B5 Platform) Discussion
3
Jun 15, 2004 04:40 AM
TTEBERTT
TT (Mk1) Discussion
11
Dec 10, 2002 01:10 PM
