Another CEL
012600 - Intake Manifold Runner Control: Regulation Deviation
P3138 - 008 - Implausible Signal - MIL ON
Freeze Frame:
Fault Status: 11101000
Fault Priority: 0
Fault Frequency: 1
Mileage: 68066 km
Time Indication: 0
Freeze Frame:
RPM: 1586 /min
Load: 65.1 %
Speed: 34.0 km/h
Temperature: 88.0°C
Temperature: 36.0°C
Absolute Pres.: 990.0 mbar
Voltage: 13.716 V
008200 - Intake Manifold Flap; Bank 1: Electrical Malfunction
P2008 - 001 - Upper Limit Exceeded - Intermittent - MIL ON
Freeze Frame:
Fault Status: 10100001
Fault Priority: 0
Fault Frequency: 1
Mileage: 68066 km
Time Indication: 0
Freeze Frame:
RPM: 1627 /min
Load: 64.3 %
Speed: 35.0 km/h
Temperature: 88.0°C
Temperature: 36.0°C
Absolute Pres.: 990.0 mbar
Voltage: 13.716 V
Noticed that the CEL only comes on after a warm startup. Cold start - no problem. Strange.




