Odd bluetooth problem
Thread Starter
AudiWorld Member
Joined: Nov 2009
Posts: 289
Likes: 1
From: Cleveland, Ohio
Odd bluetooth problem
My older Samsung phone worked fine with my 2010 A4 for about two months. But now I'm finding that the first call or two that I make during a drive will not connect properly. The system dials the phone, the screen says "connected," but I hear nothing from the other end, and the caller hears nothing coming from me. I can hang up and dial this same number, and it will then connect properly on the second or third try. I haven't changed any settings on the phone or on the car's Bluetooth system. Any suggestions?
AudiWorld Senior Member
Joined: Jan 2010
Posts: 777
Likes: 18
My older Samsung phone worked fine with my 2010 A4 for about two months. But now I'm finding that the first call or two that I make during a drive will not connect properly. The system dials the phone, the screen says "connected," but I hear nothing from the other end, and the caller hears nothing coming from me. I can hang up and dial this same number, and it will then connect properly on the second or third try. I haven't changed any settings on the phone or on the car's Bluetooth system. Any suggestions?
The last step would be a reset of one or both of the "devices".
(MMI Restart is explained in the manual "Setup + Control **** + Upper Right" but I haven't tried it to know if your entered data is cleared.)
Thread Starter
AudiWorld Member
Joined: Nov 2009
Posts: 289
Likes: 1
From: Cleveland, Ohio
If you don't hear from someone recognizing your problem I suggest that you first remove the car from your bonded devices in your phone and bond again. Removing the phone from the car list might cause extra work to enter directory or phone list details.
The last step would be a reset of one or both of the "devices".
(MMI Restart is explained in the manual "Setup + Control **** + Upper Right" but I haven't tried it to know if your entered data is cleared.)
The last step would be a reset of one or both of the "devices".
(MMI Restart is explained in the manual "Setup + Control **** + Upper Right" but I haven't tried it to know if your entered data is cleared.)
AudiWorld Senior Member
Joined: May 2009
Posts: 1,492
Likes: 2
From: Raleigh, NC
My older Samsung phone worked fine with my 2010 A4 for about two months. But now I'm finding that the first call or two that I make during a drive will not connect properly. The system dials the phone, the screen says "connected," but I hear nothing from the other end, and the caller hears nothing coming from me. I can hang up and dial this same number, and it will then connect properly on the second or third try. I haven't changed any settings on the phone or on the car's Bluetooth system. Any suggestions?
I typically hang up and call them back and it works ok at that point.
AudiWorld Member
Joined: May 2009
Posts: 136
Likes: 0
From: Los Angeles, CA
When I first tried using bluetooth with my Cliq and 3G MMI, it worked great. I could make/receive calls with no problems. Now for some reason when someone is trying to call me, I hit "accept" and I can't hear anything over my speakers. I have to end up putting the phone to my ear to talk to them. Anybody else have this problem? Btw, I've already tried doing an MMI reset and repairing my phone with the car as well.
Last edited by buiyahkah; Mar 21, 2010 at 03:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
vigilan388
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
2
May 5, 2011 04:11 AM
jkozlow3
A4 (B8 Platform) Discussion
5
Dec 10, 2008 09:01 PM
