AHA and ATQ front crank seals different?
Thread Starter
AudiWorld Member
Joined: Apr 2011
Posts: 295
Likes: 1
From: UV 1 Million Florida
AHA and ATQ front crank seals different?
I found them on ECS for a good price, why does it say ATQ only? My donor motor is an AHA.
http://www.ecstuning.com/Audi-C5_A6-...ankshaft_Seal/
http://www.ecstuning.com/Audi-C5_A6-...ankshaft_Seal/
Thread Starter
AudiWorld Member
Joined: Apr 2011
Posts: 295
Likes: 1
From: UV 1 Million Florida
I am a little confused by that. So they are the same just have different part numbers?
I saw a post on one of the boards about replacing the front crank seal without the two special audi tools. Was it something like use two drywall screws to yank the old one and any circular implement to get the new one in? Sounds crude but sometimes crude works.
I saw a post on one of the boards about replacing the front crank seal without the two special audi tools. Was it something like use two drywall screws to yank the old one and any circular implement to get the new one in? Sounds crude but sometimes crude works.
AudiWorld Super User
Joined: Jan 2003
Posts: 6,994
Likes: 204
From: Lake Tapps, WA
As I stated, all use the same seal. There are two seals: one for early MY 2001s (up thru VIN 4B–Y–036–000) and one for later MY 2001s. Seal size is 35 mm ID x 48 mm OD x 10 mm wide.
Thread
Thread Starter
Forum
Replies
Last Post
Is it absolutely neccessary to use the Audi brand gasket sealant when doing the Cam Chain Tensioner?
AEBlessed (1.8G)
1.8T Discussion
1
Jul 31, 2007 05:57 PM
liz
Audi 90 / 80 / Coupe quattro / Cabriolet
9
Mar 16, 2002 08:30 AM
