Beeping from dash 1994 100s
Thread Starter
New Member
Joined: Dec 2003
Posts: 46
Likes: 0
Beeping from dash 1994 100s
The malfunction indicator display keeps going on and off and beeping. It shows that I have a brake light out and a headlight out. All my brake light bulbs are working and so are the headlights. A couple of days ago it even showed that my car was over heating. I have the car for two years, I never replaced the headlight bulbs and I replaced one brake light bulb a year ago. So it cant be that Im using the wrong bulbs because it just started doing this recently. It there an easy fix or should I just rip the damn thing out of the dash.
AudiWorld Member
Joined: Sep 2003
Posts: 146
Likes: 0
Re: Beeping from dash 1994 100s
pull the instrument cluster out and clean the connectors, check for loose or bent pins, more likely a loose solder pin to the board... if that does not work then auto check went bad or the bulb monitor relay
New Member
Joined: Aug 2004
Posts: 3
Likes: 0
Re: Beeping from dash 1994 100s
Try the procedure at the site below:
I used it to successfully resolve my intermittent brake light alarm and beeping problem this past summer. (After I replaced *every* bulb in the car first!) -Joe<ul><li><a href="http://12v.org/maintenance/repairs/acdisp.php">http://12v.org/maintenance/repairs/acdisp.php</a</li></ul>
I used it to successfully resolve my intermittent brake light alarm and beeping problem this past summer. (After I replaced *every* bulb in the car first!) -Joe<ul><li><a href="http://12v.org/maintenance/repairs/acdisp.php">http://12v.org/maintenance/repairs/acdisp.php</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
Ming rings in Minn
A6 / S6 (C5 Platform) Discussion
4
Sep 20, 2005 12:19 PM
VicG
A4 (B5 Platform) Discussion
10
Oct 16, 2001 12:59 PM
