New Audi Allroad w/ ACE Convex 20x10.5 All Around
Thread Starter
Former Vendor
Joined: Feb 2013
Posts: 126
Likes: 0
New Audi Allroad w/ ACE Convex 20x10.5 All Around
ACE Convex w/ Audi Allroad
Specs:
Vehicle: Audi Allroad
Wheel Specs: 20x10.5 All Around
Wheel : ACE Convex - Matte Silver
Vehicle: Audi Allroad
Wheel Specs: 20x10.5 All Around
Wheel : ACE Convex - Matte Silver
Thread Starter
Former Vendor
Joined: Feb 2013
Posts: 126
Likes: 0
Thanks! According to the customer the car drives great! Here is a quote from them,
"I ditched the 20X10 ET35 M310 wheels in favor of custom offset matte silver Ace Convex wheels measuring 20X10.5 ET33 wrapped with General 275/30/20 lowered on H&R Avant coilovers. After doing measuring and research I have found the most aggressive offset for the Allroad without modifying the rear fenders being as low as my car is running 275's. General tires run extremely narrow which was the key to fitting this setup. Most other tires would rub badly. To those looking at 20X10.5 squared I would suggest going with an ET38 to be safe and run a 5mm spacer up front to clear the front suspension. I test fitted an ET35 wheel and although probably doable it was very close to the front upper control arm. Ace has excellent customer service and was fully willing to fulfill my custom request. The car rides great. I hope the information above helps Allroad owners looking to complete the look of their ride."
I hope this helps out!
"I ditched the 20X10 ET35 M310 wheels in favor of custom offset matte silver Ace Convex wheels measuring 20X10.5 ET33 wrapped with General 275/30/20 lowered on H&R Avant coilovers. After doing measuring and research I have found the most aggressive offset for the Allroad without modifying the rear fenders being as low as my car is running 275's. General tires run extremely narrow which was the key to fitting this setup. Most other tires would rub badly. To those looking at 20X10.5 squared I would suggest going with an ET38 to be safe and run a 5mm spacer up front to clear the front suspension. I test fitted an ET35 wheel and although probably doable it was very close to the front upper control arm. Ace has excellent customer service and was fully willing to fulfill my custom request. The car rides great. I hope the information above helps Allroad owners looking to complete the look of their ride."
I hope this helps out!
Last edited by ACEALLOYWHEELS; May 3, 2013 at 02:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mrwho13
A4 (B5 Platform) Discussion
2
Aug 30, 2002 12:50 PM
