Hi there Kdagher. This is George (thirdeyethirst) on eBay. When you get a chance plz text me at (954)-701-454. ty

Hi, I’m interested in your Euro OLED tail lights. I have a 2024 PHEV Q5. I understand some addditional wiring and I presume some programming would need to be done. I’m pretty capable so that’s not an issue. I’m in Portland, Oregon. How much are you asking?
easiest contact for me is either direct email (kjkoroch@gmail.com) or text (503 803 8600)
best,
Karl Koroch

Hi,

I have seen few of your posts regarding connecting wireless charger to MIB 3 MMI, I wonder if you could confirm which pins on the MMI grey connector you have used for connecting ins 2 and 3 from the wireless charger.
I have attempted installation on my Q5 FY which also have MIB 3 MMI, pins 2 & 3 connected to MMI pins 5 and 11 and the charger wakes up and work with ignition on however there is no communication with the module.

Just to add I've tried all possible and suggested coding and adaptation options.

Appreciate your help, thanks
Marcin

Hello, I have a problem with coding the Audi A6 C7 headlights. The car was imported from the USA. I installed full LED headlights. (I bought it without lamps). I have a problem, only the daytime running LED is on, but the orange LED for the turn signals is not on. what should I do?
I did the coding according to your scheme. : 209: 0 (OUTER LEFT) OR TURN SIGNAL FOR THE EU MARKET (12)
210: 32 (OUTER RIGHT) OR TURN SIGNAL FOR THE EU MARKET (44)
PIN swap? coding? please help. Thank you

Hello kdagher,

I saw your post for audi a6 tailights decoded and I need your help if it's possible.

I have Audi a6 2014 USA version and I need to convert my taillights to EU. I need to separate the brake lights and rear turn signals from each other. Does your code do this?
Or do you have any previous experience to convert the tailights from USA to EU?

I'm so interested to find a solution because recently I have bought a new pair of taillights but unfortunately they works only for EU version not for US version, and I was advised that I need to do some coding first and I was wondering if you can help to do that.

I can pay for the code.

Thanks!

Hello. I read your post on the rear lights of the audi a6. I need to separate the rear turn signals from the brake lights. Can you help make it right?

Hi, I want to convert my taillights from USA to EU, tell me how to do this ? Audi a 4 b8 avant

Hi there, I have a 2010 Audi A6 Avant - I'd like to recode the tail lights so that I can use (currently not working) the amber bulb as the turn signal. Any info you have would be really appreciated thank you.

Hello

I saw your post about post facelift Audi A6 TAILIGHTS DECODED
Do you have codes for A4 B8 2010 pre facelift?
Can you help me convert my taillights from NAR to EU?

Thanks in advance

Hi! I saw your post for the auto hold on the q5. I got the same harness you did - was wondering if you recall where exactly you plugged in the blue and brown wires that stick out from the button connector. Do you just leave them dangling?