Mark this thread as Unsold
Audi Q5 Audi SQ5 Puddle Door Courtesy LED Projector CANBUS error free Lights x 4
#1
AudiWorld Junior Member
Thread Starter
Audi SQ5 Puddle Door Courtesy LED Projector CANBUS error free Lights x 4
Audi SQ5 Puddle Door Courtesy LED Projector CANBUS error free Lights x 4
I have available custom produced top quality LED SQ5 Projector door lights.
These were specially commissioned for those wanting something a little different. These are not off the shelf items and you cannot buy these anywhere else in the UK or abroad. I have had these both bench tested and vehicle tested to ensure no errors and they are CANBUS error free.
These are direct replacement for the OEM door puddle lights (please ensure you have these fitted prior to purchase)
You can rotate the projection so it can sit across the door entrance or in line with the door itself.
Comes as a set of four (front and rear) door courtesy lights.
These are OSRAM LED
Fitting instructions as follows:
1. Remove existing lights using a trim remover tool
2. Unplug existing light
3. Connect new SQ5 Projector light (included wiring is not needed)
4. Line the light up in position without fully inserting and twist the black insert to ensure the light is at the desired angle
5. Install new SQ5 Projector by inserting and placing pressure on the light to secure. Please ensure flat palm is used when pressing to ensure even pressure.
6. Stand back and admire the new modification
PLEASE NOTE the lights require significant pressure to install in and pop in to place.They are also designed for the left and right doors so make sure you have the right side before installing!
$170 delivered
I have available custom produced top quality LED SQ5 Projector door lights.
These were specially commissioned for those wanting something a little different. These are not off the shelf items and you cannot buy these anywhere else in the UK or abroad. I have had these both bench tested and vehicle tested to ensure no errors and they are CANBUS error free.
These are direct replacement for the OEM door puddle lights (please ensure you have these fitted prior to purchase)
You can rotate the projection so it can sit across the door entrance or in line with the door itself.
Comes as a set of four (front and rear) door courtesy lights.
These are OSRAM LED
Fitting instructions as follows:
1. Remove existing lights using a trim remover tool
2. Unplug existing light
3. Connect new SQ5 Projector light (included wiring is not needed)
4. Line the light up in position without fully inserting and twist the black insert to ensure the light is at the desired angle
5. Install new SQ5 Projector by inserting and placing pressure on the light to secure. Please ensure flat palm is used when pressing to ensure even pressure.
6. Stand back and admire the new modification
PLEASE NOTE the lights require significant pressure to install in and pop in to place.They are also designed for the left and right doors so make sure you have the right side before installing!
$170 delivered