Mark this thread as Unsold
Audi A4 Fast Intentions B6-B7 S4 6spd downpipes
#1
AudiWorld Newcomer
Thread Starter
Join Date: Sep 2015
Location: Concord, CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Fast Intentions B6-B7 S4 6spd downpipes
FI 2.5" stainless downpipes w/ cats for manual trans B6-B7 S4
Car failed visual inspection in CA as cats arent visible under the car and look like straight pipes (passed sniffer OK). These were welded onto a 2 1/4" catback, and left all the downpipe material when cut off the car, plus a little of the catback left in there that can be chiseled out and either use v-bands, flanges or butt welded. These were on the car previously for about 30k miles, no MILs, sound awesome with a huge HP gain.
$800 + buyer pays shipping or local pickup in SF Bay Area or surrounding.
Car failed visual inspection in CA as cats arent visible under the car and look like straight pipes (passed sniffer OK). These were welded onto a 2 1/4" catback, and left all the downpipe material when cut off the car, plus a little of the catback left in there that can be chiseled out and either use v-bands, flanges or butt welded. These were on the car previously for about 30k miles, no MILs, sound awesome with a huge HP gain.
$800 + buyer pays shipping or local pickup in SF Bay Area or surrounding.
#3
AudiWorld Newcomer
Thread Starter
Join Date: Sep 2015
Location: Concord, CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I'm not familiar with what differences from a sedan to a cabrio, but maybe it's work asking FI or JHM since they also sell them. I'd think that no matter what exhaust this would be mated to, there would be a little fabrication to make it work. Nothing any decent exhaust shop could handle as long as they deal with stainless.
I'd do a little research for you but I'm busy for the next 4 days and won't have a chance till next weekend. Let me know if you find anything out.
I'd do a little research for you but I'm busy for the next 4 days and won't have a chance till next weekend. Let me know if you find anything out.
#4
I'm not familiar with what differences from a sedan to a cabrio, but maybe it's work asking FI or JHM since they also sell them. I'd think that no matter what exhaust this would be mated to, there would be a little fabrication to make it work. Nothing any decent exhaust shop could handle as long as they deal with stainless.
I'd do a little research for you but I'm busy for the next 4 days and won't have a chance till next weekend. Let me know if you find anything out.
I'd do a little research for you but I'm busy for the next 4 days and won't have a chance till next weekend. Let me know if you find anything out.
Thread
Thread Starter
Forum
Replies
Last Post
Roger @ CA
A4 (B5 Platform) Discussion
14
12-23-2007 11:26 AM
OneEighty
A4 (B5 Platform) Discussion
23
06-12-2003 06:27 AM
Cyan S4
A4 (B5 Platform) Discussion
8
01-31-2002 03:05 PM
Scott W
S4 / RS4 (B5 Platform) Discussion
4
11-20-2001 11:53 AM
hater
S4 / RS4 (B5 Platform) Discussion
31
09-25-2001 07:33 PM