AEM Update... X-Post
#1
AudiWorld Super User
Thread Starter
AEM Update... X-Post
Well, the Green Beast was awakened from a 2 month slumber today. The car was started the the programming of the AEM system has begun. Its off to the dyno tomorrow to get everything sorted but it was able to idle and transition.
This is a shot of the canon plug that disconnects everything at the firewall
<img src="http://pictureposter.audiworld.com/15038/img_1825.jpg">
Here's a shot of the new injector wiring and my new 550cc 3 ohm injectors. The RC 440cc injectors I was using were 16 ohms and the AEM did not like them at all.
<img src="http://pictureposter.audiworld.com/15038/img_1826.jpg">
This is a pic of the main sensor for timing and synching. They machined the crank pulley and set the sensor to make its reading here.
<img src="http://pictureposter.audiworld.com/15038/img_1829.jpg">
More to follow after the dyno.
Hap, wit dakine urges from Evahboost
This is a shot of the canon plug that disconnects everything at the firewall
<img src="http://pictureposter.audiworld.com/15038/img_1825.jpg">
Here's a shot of the new injector wiring and my new 550cc 3 ohm injectors. The RC 440cc injectors I was using were 16 ohms and the AEM did not like them at all.
<img src="http://pictureposter.audiworld.com/15038/img_1826.jpg">
This is a pic of the main sensor for timing and synching. They machined the crank pulley and set the sensor to make its reading here.
<img src="http://pictureposter.audiworld.com/15038/img_1829.jpg">
More to follow after the dyno.
Hap, wit dakine urges from Evahboost
Thread
Thread Starter
Forum
Replies
Last Post
ModifiedA4
S4 / RS4 (B5 Platform) Discussion
0
11-29-2005 08:16 PM