gearhead1186

I went to the track last weekend and took out my rear and front passenger seat. I unplugged the 3 plugs that were under the front passenger seat.

Airbag light was obviously on when I had the seat out. Now, after putting the seat back in and plugging everything back, the ABS, ESP and AirBag light stay lit.. any ideas?

Its APR chipped.

S4GARO

for the airbag you need a vag to reset it.

gearhead1186

gotcha.. thanks..

just an update.. the airbag stays on right when I start the car, then after a couple min of driving, the ABS and ESP light join in on the party..

any recommendation on a VAG off ebay?

S4GARO

i myself just orderred the ecs tuning cable...

then download the software from rosstech...

hopefully that works

gearhead1186

so u just ordered one of those 30 dollar cables off ebay and supplemented with the 805.3 software download from ross tech?

thanks

S4GARO

no i ordered the cable from ecstuning.com - hope they are a sponsor here.

and will be using the older software from ross tech.

gearhead1186

gotcha. thanks. now did u get the usb or serial? i plan on getting the usb.. with usb im assuming i download Release 311.2..

or do i get Release 409.1? but it says its not compatible with 3rd party interfaces...

thanks.. just wanted to get it cleared up.

gearhead1186

here is the quick link to their archives..

http://www.ross-tech.com/vag-com/download/archives.html

S4GARO

this is what i was told..or saw posted

i run the cable from ECS - $30 - and it works great w/ 409.1

gearhead1186

gotcha.. thanks a bunch