djpap

Hello

I have an Audi A8 03/2005. I want to put AMI. I found a used AMI with part number 4E0035785B, is it compatible or i need 4E0035785F?

Thank You
Dimitris

Crai6m4ck

"F" is the latest model and the one i upgraded with but i believe "B" should work. Can anyone else verify?

the_duke

Looks like it will work. The most important part is the MOST.

MP4.2+6.0

I installed it right when it came out as a separate part in my 2006 US spec W12. Back then there was not even a suffix letter on the part #. Thus mine must be either be equivalent to an "A" or a pre-A version wise. Works 100% and takes the MMI updates of course, one of which actually modified the AMI interface a bit to display more track information.

richard-tx

On early AMI units, there is a firmware update that is available.

storka

Yes from the Audi site.
Forget exactly where. Put it on a usb and install.
Your Mmi software has to be over certain update number to work your ami

MP4.2+6.0

3360 for the USA version is the minimum for AMI, which was the revision level as of about late 2007. To run MMI update at or beyond that level, in turn you also needed a Navigation map version beyond the first one (2004/version 4 in USA).

Cboogie

Where did you get your AMI unit? I can't find one anywhere. I want to put in my 06 D3

storka

There are plenty on eBay just a matter of how much you want to pay

Crai6m4ck

I did a search on car-part.com and found a junkyard that had one.