Rear LCA ????>>>
Thread Starter
Junior Member
Joined: Jun 2006
Posts: 380
Likes: 0
Rear LCA ????>>>
<center><img src="http://www.ttstuff.com/images/forge/FMPFR3510_540.jpg"></center><p>Is this the correct bushing that Al @CPT recommended changing out when installing the lca??
Thanks<ul><li><a href="http://www.ttstuff.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=FMPFR3510 ">http://www.ttstuff.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=FMPFR3510 </a</li></ul>
Thanks<ul><li><a href="http://www.ttstuff.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=FMPFR3510 ">http://www.ttstuff.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=FMPFR3510 </a</li></ul>
AudiWorld Senior Member
Joined: Apr 2005
Posts: 1,528
Likes: 0
No. That bushing is a part of the new control arms. It's the outer bushings that he suggested.
The outer bushings (spherical bearing on 2000-2002 and rubber bushing on 2003&later)is the one that seized on SparTTan and broke his control arm.
ECS tuning carries them.
ECS tuning carries them.
AudiWorld Senior Member
Joined: Apr 2005
Posts: 1,528
Likes: 0
Re: can you link me to the correct part? Thanks
Look at the outer rear upper and lower ball joint. IT's available in two flavors ES#4198, Pre 2003 sphereical bearing (expensive) and 2003 - rubber bushings (relatively cheap) ES#4627.
Dan<ul><li><a href="http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Audi&engine=225HP&mo del=TT%20MKI&submodel=Quattro&category=Sus pension">ECS Tuning</a></li></ul>
Dan<ul><li><a href="http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?make=Audi&engine=225HP&mo del=TT%20MKI&submodel=Quattro&category=Sus pension">ECS Tuning</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
A4 (B8 Platform) Discussion
0
Jan 23, 2018 08:43 AM
ECS Tuning-Audi
Audi A3 / S3 / RS 3
0
Apr 27, 2016 11:29 AM
Jeff Vader - boscoj
S4 / RS4 (B5 Platform) Discussion
0
Dec 17, 2002 01:02 PM
