B8 tdi 143bhp misfire under high load
Thread Starter
AudiWorld Newcomer
Joined: Jul 2022
Posts: 1
Likes: 0
B8 tdi 143bhp misfire under high load
Hi,
I have a b8 tdi while driving under high load I experience a misfire and the car then goes into limp mode. There is white smoke coming from exhaust. There is a P1237 code for cylinder one open circuit. Have done few tests with multimeter on injector and harness and dont have a reason to believe that there is an issue with either. Fuel filter has also been replaced recently. Also two codes for glow plugs in cylinder 3 & 4, will be replacing these plugs tomorrow, will report back, but don't think they are related. Any advice?
Thanks
I have a b8 tdi while driving under high load I experience a misfire and the car then goes into limp mode. There is white smoke coming from exhaust. There is a P1237 code for cylinder one open circuit. Have done few tests with multimeter on injector and harness and dont have a reason to believe that there is an issue with either. Fuel filter has also been replaced recently. Also two codes for glow plugs in cylinder 3 & 4, will be replacing these plugs tomorrow, will report back, but don't think they are related. Any advice?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
mrayhan
Q5/SQ5 MKI (8R) Discussion
2
May 25, 2020 07:15 AM
Max_Power
A6 / S6 (C5 Platform) Discussion
11
Apr 24, 2009 11:42 AM
Tom Serrago
A4 (B5 Platform) Discussion
16
Jan 16, 2004 02:15 PM
