**Don Nguyen | Vinyl roof wrapping, tail light tinting, black out chrome trim install
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
Most of the pictures of interiors that I’ve wrapped and posted in the past were of the 3M dinoc matte carbon fiber finish. However, the owner of this BMW E46 3 series had me vinyl wrap the interior on his car in the 3M 1080 gloss carbon fiber finish. The 1080 gloss carbon is more black versus the dinoc matte carbon which is more of a grayish finish. The owner of this car drove out to me in Anaheim Hills/Orange county to have the work done. I thought the way this finish turned out on the interior went well with the car.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
The owner of this blue E92 M3 has had me do several of his cars in the past before as well. This time he brought me his car to have me lightly smoke/tint the tail lights on his car. Sorry for the before/during pictures, the lighting wasn’t as good, but hopefully you can see how the tail lights look like in the after pictures. The owner of this car was around Newport Beach are and came out to me in Anaheim Hills/Orange county to have the tint work done. It’s a fairly light shade, which gives it a very factory look.
Before:
Driver/left side stock - passenger/right side tinted:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side stock - passenger/right side tinted:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
I did quite a bit of work on this white Mercedes Benz C class C250 coupe. The owner of the car had me black out the chrome/brushed aluminum window trim with my gloss black vinyl material. In addition the window trim, I also lightly tinted/smoked the tail lights and blacked out the center lower portion of the front bumper in gloss black as well. Even though the car was still relatively stock, these small subtle changes still changed the look of the car quite a bit, without making it look overly modified. It’s as if it could have come from the factory this way. I believe the owner of this car was from Riverside and drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
Driver/left side tinted/smoked - Passenger side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side tinted/smoked - Passenger side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
The owner of this black BMW 3 series E92 coupe had me black out the chrome/brushed aluminum on his window trim in my matte black vinyl. We went with matte black over gloss black on his car to give it some contrast. Blacking out the chrome makes a big difference, especially on a black car that doesn’t have any other chrome accents on it. If anything, the only other thing I would have blacked out as well would have been the amber reflectors in the front bumper. The owner of this car drove out from Los Angeles to me in Anaheim Hills/Orange County to have the vinyl wrap work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
The owner of this alpine white BMW E92 M3 sedan came by to have me vinyl wrap the roof of his car in my gloss black vinyl material. The black roof really completely changes the look of the car, as you can see in the before/after pictures. The vinyl gets tucked in every where along the roof, rails, and antenna, during the installation. This makes sure that the roof holds longer over time and to the elements. The owner of this car was also in Orange County and drove out to me in Anaheim Hills to get the vinyl wrap work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
I’ve had requests from people to post some more pictures of interiors that I’ve done. This is on a BMW F10 5 series sedan that originally had brushed aluminum/silver trim accents in the car. The interior trim on this car is different than most other cars, since the interior trim pieces have an edging around the trim pieces, which you can see that I left unwrapped in the pictures. Also, most interiors I’ve done in the past were with the 3M dinoc matte carbon fiber material, however, the owner of this car wanted me a finish that was slightly glossier and blacker, so we went with with the 3M 1080 gloss carbon fiber finish. In addition to his interior trim, I also did his rear bumper diffuser piece in the same material. The owner of this car was from Pomona and drove out to me in Anaheim Hills, Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
Typically people have me lightly tint/smoke their tail lights with my film, but the owner of this white Audi A4 sedan had me light smoke/tint his head lights instead. The tint is actually fairly light, so it doesn’t affect the light output from the head lights onto the road by any significant amount. I’ve done this for several cars in the past, and most owners have reported to me that the light output was fairly the same or any light output difference was fairly insignificant from their perspective in the car. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. In addition, having the film on the headlights will protect it from rock chips and also fading/hazing that typically happens to head lights over time.
Before:
Passenger left side - stock :: Driver/right side - Tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Before:
Passenger left side - stock :: Driver/right side - Tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
For those who are keep track, I may be making my last norcal trip for the year either the first or second week of September. I haven’t finalized it, but once I do, I’ll make an official thread for it. However, those who e-mail me ahead of time will get priority registration for setting up appointment times with me.
The owner of this brand new white Mercedes Benz E250 sedan had me wrap his roof in my gloss black vinyl material and also black out the chrome/brushed aluminum window trim in the same finish to match. I would have also done the rear trunk bar chrome piece to match, but the owner of this car wanted to leave it I believe. The black roof and blacked out window trim sets it off from the other E classes on the road, but without making it look too modified. It’s a very factory look, in my opinion.
Before:
After:
-Don Nguyen
donathon@gmail.com
The owner of this brand new white Mercedes Benz E250 sedan had me wrap his roof in my gloss black vinyl material and also black out the chrome/brushed aluminum window trim in the same finish to match. I would have also done the rear trunk bar chrome piece to match, but the owner of this car wanted to leave it I believe. The black roof and blacked out window trim sets it off from the other E classes on the road, but without making it look too modified. It’s a very factory look, in my opinion.
Before:
After:
-Don Nguyen
donathon@gmail.com
AudiWorld Stories
Bringing Audi to Life for Audi Fans
Top 10 Most Expensive Audis Ever Sold on Bring-A-Trailer
Brett Foote
10 Audi Features & Options We Miss the Most!
Joe Kucinski
Audi Recreates Crazy-Looking Speed Record Breaker From 1935
Verdad Gallardo
Coachbuilder Recreates the 1995 Audi TTS Concept
Verdad Gallardo
Every Audi V10 Car Ranked!
Joe Kucinski
9 Audi Designs That Aged Like Fine Wine
Verdad Gallardo
2026 Audi Q5 Buyer's Guide (Every Model Explained)
Brett Foote
Ranking Every Current Audi 'S' Model From Worst to First!
Joe Kucinski
10 Best Audis That are FINALLY LEGAL to Import to the U.S.!
Joe Kucinski
Thread Starter
Former Vendor
Joined: Feb 2009
Posts: 7,151
Likes: 7
Here's a white Audi B8 that I vinyl wrapped the roof, hood, and bumper in my matte black finish/material. The owner of this car wanted to continue the theme down from the roof to the center raised section of the hood and the center section of the bumper. I thought it looked pretty cool, and it actually ended up making the car look wider. The owner of this car was in San Diego, and I happened to be down there in the area already from Orange County, so I dropped by and did some work on his car.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
