Problem with lights...
Thread Starter
AudiWorld Super User
Joined: Jan 2003
Posts: 4,707
Likes: 0
Problem with lights...
Both front parking lights, both side marker lights, instrument cluster light and passenger taillight all out. Checked all fuses and bulbs are all are ok. What else could this be?
Member
Joined: Jan 2001
Posts: 2,323
Likes: 0
Follow these instructions to remove the headlight switch...
while leaving the bolster in. The back half of the switch may have come loose and needs to be pushed back together.
Click on link for how to...<ul><li><a href="http://www.ttgallery.fotki.com/welcome_to_the_new/my_mods_and_pics/fog_light_mod_allow/image001.html">http://www.ttgallery.fotki.com/welcome_to_the_new/my_mods_and_pics/fog_light_mod_allow/image001.html</a</li></ul>
Click on link for how to...<ul><li><a href="http://www.ttgallery.fotki.com/welcome_to_the_new/my_mods_and_pics/fog_light_mod_allow/image001.html">http://www.ttgallery.fotki.com/welcome_to_the_new/my_mods_and_pics/fog_light_mod_allow/image001.html</a</li></ul>
Member
Joined: Jan 2001
Posts: 2,323
Likes: 0
How does the wire harness look going into the headlight switch?
Maybe a wire or two has been pulled.
Usually if the bolster is removed while the headlight switch is still in the bolster the wire harness can pull on the back of the headlight switch. Sometimes causing the headlight housing to partially separate from the front of the switch. This separation can cause issues with the lighting system. Maybe wires have come loose from the wire harness?
Usually if the bolster is removed while the headlight switch is still in the bolster the wire harness can pull on the back of the headlight switch. Sometimes causing the headlight housing to partially separate from the front of the switch. This separation can cause issues with the lighting system. Maybe wires have come loose from the wire harness?
Thread Starter
AudiWorld Super User
Joined: Jan 2003
Posts: 4,707
Likes: 0
Re: How does the wire harness look going into the headlight switch?
I wonder if the splice I did for my boost gauge dimmer setup could have come loose (light blue wire). Can I check the circuit to see if it's open?
Thread
Thread Starter
Forum
Replies
Last Post
AudiSport4000
Audi 4000 / Coupe GT Discussion
6
Jan 29, 2007 09:16 AM
Snow Trooper *Swiss*
Audi 90 / 80 / Coupe quattro / Cabriolet
1
Oct 15, 2006 08:03 PM
toxicavenger70
Audi 90 / 80 / Coupe quattro / Cabriolet
5
Sep 23, 2004 10:16 AM
