2004 Audi A6 2.7T tiptronic - CCM flooded - rewired
#1
AudiWorld Senior Member
Thread Starter
2004 Audi A6 2.7T tiptronic - CCM flooded - rewired
CCM under driver seat was totally flooded for a long time, corroded (cable rotted off).
Bought matching (number and letter) module and pigtails.
Cut off ALL connectors and solder all on.
Nothing working (locks only close, no windows, etc).
Bentley wiring diagram "Central Locking System" (appears to be the CCM????) has only 2 mentions of connectors under driver seat. Since there are 5 connectors (beige, red, small black, larger black, power black) with maybe 80 or so wires, you would think there should be more mention?
Where in Bentley can find pin out for the 5 connectors with wire colors so I can start troubleshooting and tracing?
Bought matching (number and letter) module and pigtails.
Cut off ALL connectors and solder all on.
Nothing working (locks only close, no windows, etc).
Bentley wiring diagram "Central Locking System" (appears to be the CCM????) has only 2 mentions of connectors under driver seat. Since there are 5 connectors (beige, red, small black, larger black, power black) with maybe 80 or so wires, you would think there should be more mention?
Where in Bentley can find pin out for the 5 connectors with wire colors so I can start troubleshooting and tracing?
Thread
Thread Starter
Forum
Replies
Last Post
Alec1278
A6 / S6 (C5 Platform) Discussion
4
10-02-2015 10:35 AM
ECS Tuning-Audi
A6 / S6 (C5 Platform) Discussion
0
09-28-2015 12:18 PM