Fault found after coolant pump recall
#1
Audiworld Junior Member
Thread Starter
Join Date: Jul 2012
Location: Fayetteville, AR
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Fault found after coolant pump recall
Hey all,
I'm looking for a bit of advice as to what this fault might mean after the coolant pump recall:
1 Fault Found:
18064 - Coolant Pump 2
P261D 00 [040] - Short to Plus
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 10
Mileage: 121756 km
Date: 2017.03.01
Time: 18:40:04
Engine speed: 1340.00 /min
Normed load value: 7.1 %
Vehicle speed: 37 km/h
Coolant temperature: 96 ∞C
Intake air temperature: 33 ∞C
Ambient air pressure: 970 mbar
Voltage terminal 30: 14.583 V
Unlearning counter according OBD: 34
Median injection timing: 0.000 ms
Engine operating condition-Channel 87: Deceleration
Relative load value: 13.01 %
Engine torque: 0.0 Nm
Any advice would be appreciated.
I'm looking for a bit of advice as to what this fault might mean after the coolant pump recall:
1 Fault Found:
18064 - Coolant Pump 2
P261D 00 [040] - Short to Plus
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 10
Mileage: 121756 km
Date: 2017.03.01
Time: 18:40:04
Engine speed: 1340.00 /min
Normed load value: 7.1 %
Vehicle speed: 37 km/h
Coolant temperature: 96 ∞C
Intake air temperature: 33 ∞C
Ambient air pressure: 970 mbar
Voltage terminal 30: 14.583 V
Unlearning counter according OBD: 34
Median injection timing: 0.000 ms
Engine operating condition-Channel 87: Deceleration
Relative load value: 13.01 %
Engine torque: 0.0 Nm
Any advice would be appreciated.
#2
Hey all,
I'm looking for a bit of advice as to what this fault might mean after the coolant pump recall:
1 Fault Found:
18064 - Coolant Pump 2
P261D 00 [040] - Short to Plus
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 10
Mileage: 121756 km
Date: 2017.03.01
Time: 18:40:04
Engine speed: 1340.00 /min
Normed load value: 7.1 %
Vehicle speed: 37 km/h
Coolant temperature: 96 ∞C
Intake air temperature: 33 ∞C
Ambient air pressure: 970 mbar
Voltage terminal 30: 14.583 V
Unlearning counter according OBD: 34
Median injection timing: 0.000 ms
Engine operating condition-Channel 87: Deceleration
Relative load value: 13.01 %
Engine torque: 0.0 Nm
Any advice would be appreciated.
I'm looking for a bit of advice as to what this fault might mean after the coolant pump recall:
1 Fault Found:
18064 - Coolant Pump 2
P261D 00 [040] - Short to Plus
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 10
Mileage: 121756 km
Date: 2017.03.01
Time: 18:40:04
Engine speed: 1340.00 /min
Normed load value: 7.1 %
Vehicle speed: 37 km/h
Coolant temperature: 96 ∞C
Intake air temperature: 33 ∞C
Ambient air pressure: 970 mbar
Voltage terminal 30: 14.583 V
Unlearning counter according OBD: 34
Median injection timing: 0.000 ms
Engine operating condition-Channel 87: Deceleration
Relative load value: 13.01 %
Engine torque: 0.0 Nm
Any advice would be appreciated.
I'm getting this exact same code, also after the recall- please tell me you figured out what it was!
Thread
Thread Starter
Forum
Replies
Last Post
Kanchanj88
A4 (B8 Platform) Discussion
2
09-20-2018 09:08 AM
halflife
S4 (B6 & B7 Platforms) Discussion
5
11-13-2004 09:03 AM
Michael Benno
A6 / S6 (C5 Platform) Discussion
5
06-14-2004 01:36 PM
SteveJ_in_TX
Audi 5000 / 200 / V8 Discussion
5
02-25-2003 12:38 PM