4Driver4

There is write-up on the switch in the Tech Section. Read it.

cvbadass

I wouldn't need a new key then? just the electronic part behing it?

cvbadass

So no new key, just the electronics behind it?

mtroxel

l11

turbo510

No, and not electronics, only the switch, which comes out after you lossen a couple of set-screws. This part is very easy, the steering wheel less so because you have to take the airbag module out first. You should have a set of 12-point drivers (like used on inner CV joints) because the steering wheel bolt likely needs one for removal. As 4Driver said, check out the writeup, and you'll do fine.

4Driver4

IIRC, the airbag module is not in the way. It's mounted on the center hump behind the climate control.

joemech

evap canister filled with gas? can you smell gas coming out of the tailpipe?

turbo510

You're correct; I called it that after looking at the Chilton manual's pictorial (yes I admit having a copy), they call the airbag assembly "airbag module".

cvbadass

thanks all, I will try it all in the a.m. and let you know.

cvbadass

Well, I cleaned my MAF sensor, and so far so good. I will see tomorrow, if it keeps starting.