DHY trans code is for...?
Member
Joined: May 2005
Posts: 2,592
Likes: 1
a comment.....
Transmission code DHY replaces DDK(installed in the very early prod A4 03.96-07.96)
-manufactured: 07.96
-application: Audi A4 1996>
-engine: 2.8 ltr, 142kW(191 hp)
-final drive:3.700
-1st gear: 3.500
-2nd gear: 1.944
-3rd gear: 1.300
-4th gear: 0.943
-5th gear: 0.789
-reverse: 3.444
-manufactured: 07.96
-application: Audi A4 1996>
-engine: 2.8 ltr, 142kW(191 hp)
-final drive:3.700
-1st gear: 3.500
-2nd gear: 1.944
-3rd gear: 1.300
-4th gear: 0.943
-5th gear: 0.789
-reverse: 3.444
AudiWorld Super User
Joined: Mar 2000
Posts: 21,689
Likes: 0
Fit and work are two different things.
There have been many different bell housing castings over the years. The casting you want has a provision for the crank speed sender... but not just that it has the keeper screw hole cast and tapped already. I believe the DJR and DWM (essentially the same gearbox, 2.8 ratios & 3.89 final drive) are what you are looking for.
Thread
Thread Starter
Forum
Replies
Last Post
Joona Lauri Kudjoi
A6 / S6 (C5 Platform) Discussion
2
Mar 2, 2017 09:29 AM
CK:1.8T+Rabbitâ„¢
A4 (B5 Platform) Discussion
3
May 6, 2004 04:42 PM
Jet Jockey/A4 Pilot
S4 (B6 & B7 Platforms) Discussion
0
Mar 1, 2004 09:59 AM
