Door locking problems
Thread Starter
Audiworld Junior Member
Joined: Jan 2003
Posts: 53
Likes: 0
Door locking problems
So I installed a new central locking pump last night(thanks for all the info from the people who chipped in). After I installed the pump I locked the doors to test if it works. It did. So then the power locks didnt work from the remote. I turn the key to unlock all the doors and the lock just spins. So I have to unlock the doors from the truck. Does anyone have a diagram for how to tear apart the drivers door locking mechanism? Or can anyone point me in the right direction? Thanks again guys.
AudiWorld Super User
Joined: Sep 2003
Posts: 14,277
Likes: 0
the pass side lock does not work as well? You'll have to program the key to the new CLP
by following the directions in the tech section... (hope you have another key for this)
Sorry, I have no idea about your broken lock though. I'd just take the door panel off and look around.
Sorry, I have no idea about your broken lock though. I'd just take the door panel off and look around.
Thread Starter
Audiworld Junior Member
Joined: Jan 2003
Posts: 53
Likes: 0
Re: sorry, I sux at teh reading... I guess you'll need to use that lock to program the key.
Yeah, I had everything apart last night, where the key goes in is striped and it doesnt turn the other part of the linkage to unlock the door. I need to figure out how to remove it and maybe get a part number and Ill be set. Does any once have pictures how it works that they can send?
Thread
Thread Starter
Forum
Replies
Last Post
tanchelli
A4 (B7 Platform) Discussion
3
Aug 31, 2016 05:07 PM
Illusive90S
Audi 90 / 80 / Coupe quattro / Cabriolet
4
Jan 6, 2004 11:01 PM
