I just got a new toy for my A4 in my office mail today --->
#1
Member
Thread Starter
I just got a new toy for my A4 in my office mail today --->
OEM 6 disc CD changer (part no. 4D0 035 111B)
<img src="http://pictureposter.audiworld.com/10901/mvc-006f.3.jpg">
I've got a few assumptions that need to be cleared up.
As you can see by the next two pics, there are 4 pre-drilled holes on each side. My first assumptions is that these are to mount it to the pre-drilled holes in the bracket in my trunk under the tool box. Assumption #2 is that I need to buy the screws for it, since I doubt they're there already and they didn't come with it. Next to each hole reads "M5x8max". Assumption #3 is that this is the screw size. Would I be able to take this number to any local hardware place like Home Depot and find the respective screw? Assumption #4 is that the screw between the 1 pre-drilled hole by itself and next to the top/left pre-drilled hole of the other 3 is to be moved according to its mounting plane. From left to right it reads along the arc: "V 67.5 45 22.5 H". It's in position V, so my last assumption is that it needs to be moved to H on both sides, since I'm putting it in its factory location.
<img src="http://pictureposter.audiworld.com/10901/mvc-002f.jpg">
<img src="http://pictureposter.audiworld.com/10901/mvc-003f.1.jpg">
<img src="http://pictureposter.audiworld.com/10901/mvc-006f.3.jpg">
I've got a few assumptions that need to be cleared up.
As you can see by the next two pics, there are 4 pre-drilled holes on each side. My first assumptions is that these are to mount it to the pre-drilled holes in the bracket in my trunk under the tool box. Assumption #2 is that I need to buy the screws for it, since I doubt they're there already and they didn't come with it. Next to each hole reads "M5x8max". Assumption #3 is that this is the screw size. Would I be able to take this number to any local hardware place like Home Depot and find the respective screw? Assumption #4 is that the screw between the 1 pre-drilled hole by itself and next to the top/left pre-drilled hole of the other 3 is to be moved according to its mounting plane. From left to right it reads along the arc: "V 67.5 45 22.5 H". It's in position V, so my last assumption is that it needs to be moved to H on both sides, since I'm putting it in its factory location.
<img src="http://pictureposter.audiworld.com/10901/mvc-002f.jpg">
<img src="http://pictureposter.audiworld.com/10901/mvc-003f.1.jpg">
#2
Former Vendor
Join Date: Dec 2000
Location: San Diego, CA
Posts: 15,545
Likes: 0
Received 0 Likes
on
0 Posts
Right-o
Most of your assumptions are correct. I recall only needing 4 screws total. They are small metric, so chance are you won't find them at home depot. If you've got a better hardware store, you can get them there. Otherwise, they're like $.40 ea at the dealer I think. Yes, flip it to H mode, since it'll be mounted horizontal, those are the different mounting positions, in degrees.
Trending Topics
#8
Well, it might be...look at the sheet metal screws.
I haven't spent enough time in HD screw isles to know better though. It's easier to just stop in at the dealer. I'm sure they have a box of these on hand. As them to set aside 4, and pick them up on the way home. I like the path of least resistance though...you might like a challenge.