Momo knobs
Guest
Posts: n/a
Momo *****
I'm considering getting a Momo **** for my 2.8 polished walnut interior. The short anatomic.
I have a few questions for those of you with momos.
1. A few posts in the archives mentioned the ****'s allen bolts kept loosening. Has this happened to you or was it just an isolated case.
2. In regards to the allen bolts. Do they score and flatten the threads on the shifter or do they press against a collar; which then presses against the threads?
TIA
Mark M
I have a few questions for those of you with momos.
1. A few posts in the archives mentioned the ****'s allen bolts kept loosening. Has this happened to you or was it just an isolated case.
2. In regards to the allen bolts. Do they score and flatten the threads on the shifter or do they press against a collar; which then presses against the threads?
TIA
Mark M
Guest
Posts: n/a
I had a Momo Cobra in my Z3...
...and loved it. The Allen set screws never loosened up on mine. I installed the UUC shifter on my A4, so I was able to check where the set screws hit the shifter on the Cobra **** and they make contact 1/2 inch below the threads on the stock A4 shifter; it won't damage the threads.
CraigB
CraigB
Thread
Thread Starter
Forum
Replies
Last Post
BCris69
S4 (B6 & B7 Platforms) Discussion
0
Jun 3, 2005 04:33 AM
TheBeasTT
TT (Mk1) Discussion
7
Jan 2, 2003 05:35 PM
fussball.biturbo
A4 (B5 Platform) Discussion
3
Apr 29, 2002 07:08 AM
