Pictureboy's High Flow Cat-- Almost done......... (pictures inside)
09-25-2002, 12:43 PM
#1
Elder Member
Thread Starter
Join Date: Sep 2001
Posts: 10,220
Likes: 0
Received 0 Likes
on
0 Posts
Pictureboy's High Flow Cat-- Almost done......... (pictures inside)
Sorry for the Delay, I haven't had a computer or internet access for over a week now... I'm going insane.... I've opted to do my own Telco Wiring in my new condo and i had to get all the details.
As for the manafacturing, the mandrel bender in the shop needed new carbonite(sp?) peices and pipe was shifting during bends.. it was the 3" only than the 2.5" went so the 3" HFC piping coulnt be done till now.
As you can see I have decided to AIM this kit for now for a PES-style Race Cat, apparently the items on the market dont fit everyones needs, hopefully this part will be able to please all the k04 and T-28 Drivers, and possibly the X-Chip 1.4 Bar boosting K03's..
The first item under development was a 3" Inlet - 2.5" outlet which is the one you see in the pictures, after some possibly dyno testing and overall performance/ CEL testing I think I might do a 2.5 Inlet/Outlet version.
These items are NOT for sale, they are prototype for my little project here, and is a co-operative project between some members on the board and WOA Tuning(Juan).
After prototypes are ready Juan and myself(or whomever becomes the other proprieter if Juan isnt available) will decide a selling price and provide full details.
Feel free to reply with any question and the next time I'm back on the net I'll try to answer them.
BUT I wont have Internet access full time till Oct. 3rd I believe. :-(
<img src="http://pictureposter.audiworld.com/25172/dscn0401.jpg">
<img src="http://pictureposter.audiworld.com/25172/dscn0400.jpg">
<img src="http://pictureposter.audiworld.com/25172/dscn0399.jpg">
<img src="http://pictureposter.audiworld.com/25172/dscn0398.jpg">
As for the manafacturing, the mandrel bender in the shop needed new carbonite(sp?) peices and pipe was shifting during bends.. it was the 3" only than the 2.5" went so the 3" HFC piping coulnt be done till now.
As you can see I have decided to AIM this kit for now for a PES-style Race Cat, apparently the items on the market dont fit everyones needs, hopefully this part will be able to please all the k04 and T-28 Drivers, and possibly the X-Chip 1.4 Bar boosting K03's..
The first item under development was a 3" Inlet - 2.5" outlet which is the one you see in the pictures, after some possibly dyno testing and overall performance/ CEL testing I think I might do a 2.5 Inlet/Outlet version.
These items are NOT for sale, they are prototype for my little project here, and is a co-operative project between some members on the board and WOA Tuning(Juan).
After prototypes are ready Juan and myself(or whomever becomes the other proprieter if Juan isnt available) will decide a selling price and provide full details.
Feel free to reply with any question and the next time I'm back on the net I'll try to answer them.
BUT I wont have Internet access full time till Oct. 3rd I believe. :-(
<img src="http://pictureposter.audiworld.com/25172/dscn0401.jpg">
<img src="http://pictureposter.audiworld.com/25172/dscn0400.jpg">
<img src="http://pictureposter.audiworld.com/25172/dscn0399.jpg">
<img src="http://pictureposter.audiworld.com/25172/dscn0398.jpg">
Trending Topics
09-25-2002, 04:28 PM
#10
AudiWorld Senior Member
Join Date: Sep 2001
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
If it's ready hit me up dude
I have a Dyno day for my K04 turbo kit this friday if i can get it this week i will reschedule for next week since i plan to sell the K04 kit with a HFC.