Im@wesome~ out!

Motor will be out in another 2 hrs barring anything unforseen. So far so good... *knocks on wood*.. only setback was getting the car on the lift... fvck im low
<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1796.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1797.jpg">

<img src="http://s48.photobucket.com/albums/f230/imawesomea4/IMG_1798.jpg">

oh.. to the frog.. my sister overexaggerated.. car is fine.. scraped the bumper a bit.. no fluids.. she's an idiot.

P.S. everyone should have a lift... i took my testpipe out in under 3 mins...

kenny (dremel)

Good luck with everything, post pics as you go

thewatcher101

i hate people with their own lifts - its not fair

qfrog Ti20

I'm relieved to read that.

Kris Hansen

Not that I have one, but that's all I'd have. When I build my barn, it's getting a 2 post lift.

How are you going to pull the engine with the car sitting on it's wheels?

starting ...

it should have the roll along jacks so you can lift all 4 wheels off

Kris Hansen

you end up reaching over the ramps teh whole time. A buddy of mine used to have those in his shop, they sucked for anything not centered between the ramps.

4Driver4

4 post is great for car storage. 2 post offset is the best for actual work but sucks for storage.

Kris Hansen

I don't intend to use my lift for storage.. =)

starting ...

the drive ons are a lot quicker for oil changes and easy stuff. One thing that I did like about them was that you could have the car in the air and jump up on the lift and work on the top and bottom at the same time a lot easier.