bosch super plugs review
03-27-2003, 01:53 PM
#1
AudiWorld Member
Thread Starter
Join Date: Aug 2002
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
bosch super plugs review
they are the $hit!!!!! surging at high rpms is virtually undetectable now. i had problems with my neuspeed chip but once i installed these plugs, everything seened solved. well worth it.
03-27-2003, 02:02 PM
#3
...they're the best. Something like these: Bosch F7LT-R (pic)
<center><img src="http://pictureposter.audiworld.com/27563/boschf7ltr.jpg"></center><p>
Megaparts.com You have to try a few years for 1.8t to reveal all the applications. You should be able to find a Bosch Service Centre or Bosch Parts dist near you. Forget auto chain stores that advertise the dreadfull Platinium +4s, that's all they have. Triple electrode a must, NOT Platinum anythings!
Megaparts.com You have to try a few years for 1.8t to reveal all the applications. You should be able to find a Bosch Service Centre or Bosch Parts dist near you. Forget auto chain stores that advertise the dreadfull Platinium +4s, that's all they have. Triple electrode a must, NOT Platinum anythings!
03-27-2003, 02:10 PM
#5
Senior Member
Join Date: Feb 2003
Posts: 6,957
Likes: 0
Received 0 Likes
on
0 Posts
Well, I have tried others in my 1.8t VW Beetle (Beru UltraX, Denso Iridium, BOSCH Super,...)
The BOSCH seemed to work very well. But that came after the Denso Iridium and lots of miles. I never swapped between the plugs to note any significant differences. The Beru UltraX didn't seem to be that good. The Denso I liked when I first put them in. Not sure if they lasted very long though. I guess the main thing here is the copper core- although I did not think the BOSCH Super' were.
03-27-2003, 06:08 PM
#7
AudiWorld Senior Member
Join Date: Mar 2002
Posts: 1,361
Likes: 0
Received 0 Likes
on
0 Posts
these are OEM
Go here for the full story about the advantages of changing from OEM (platinum) to copper.<ul><li><a href="https://forums.audiworld.com/a4gen2/msgs/263262.phtml">https://forums.audiworld.com/a4gen2/msgs/263262.phtml</a</li></ul>
Trending Topics
03-27-2003, 07:18 PM
#8
Senior Member
Join Date: Feb 2003
Posts: 6,957
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I had read that before. But he mentions the NGK BKR6E as one of the "copper" ones to switch
to in place of stock. He personally uses BKR7E because it is 1 colder then stock for 1.5 bar boost.
Thread
Thread Starter
Forum
Replies
Last Post
brandonb93
A4 (B7 Platform) Discussion
12
12-04-2018 01:16 PM
Cmmartin23
Parts For Sale - Archive (NO NEW POSTS HERE)
26
08-23-2016 04:44 PM
