Starting Problem
Thread Starter
AudiWorld Newcomer
Joined: Jan 2011
Posts: 2
Likes: 0
Starting Problem
2002 Audi A4 Quattro 3.0
Hey everyone I just finished putting new injector connectors on (N30-34 & N83-84) my car because the old clips on the connectors were broke. My car started fine before I did this however now it turns over but does not start. I checked the fuel pump relay and it is clicking on and off.
DTC Codes:
P1237-p1242
Any help would be greatly appreciated.
Hey everyone I just finished putting new injector connectors on (N30-34 & N83-84) my car because the old clips on the connectors were broke. My car started fine before I did this however now it turns over but does not start. I checked the fuel pump relay and it is clicking on and off.
DTC Codes:
P1237-p1242
Any help would be greatly appreciated.
AudiWorld Newcomer
Joined: Feb 2011
Posts: 5
Likes: 0
From: Montreal, Canada
2002 Audi A4 Quattro 3.0
Hey everyone I just finished putting new injector connectors on (N30-34 & N83-84) my car because the old clips on the connectors were broke. My car started fine before I did this however now it turns over but does not start. I checked the fuel pump relay and it is clicking on and off.
DTC Codes:
P1237-p1242
Any help would be greatly appreciated.
Hey everyone I just finished putting new injector connectors on (N30-34 & N83-84) my car because the old clips on the connectors were broke. My car started fine before I did this however now it turns over but does not start. I checked the fuel pump relay and it is clicking on and off.
DTC Codes:
P1237-p1242
Any help would be greatly appreciated.
those codes means there is a open circuit (no connection somewhere, wires cut, pins not making contact...) P1237 injector #1 and P1242 injector #6, make sure they are well connected and well inserted cuz as soon there's no contact those codes will apear...
good luck and let us know
Thread Starter
AudiWorld Newcomer
Joined: Jan 2011
Posts: 2
Likes: 0
I know that it is open and not short to ground or short to B+...Actually when I said P1237-p1242, what I mean is all 6 show as open...Just to update you I did not have these codes prior to replacing the injector wiring connectors. I do have fire, when cranking I get about 200rpm and then it tries to start and jumps up to about 500-600 rpm. I had a new starter, alternator, and battery put on, so I know it is not the charging system. As far as the connectors themselves I hear them click in to the injector because they are brand new from audi dealer. If anyone else would like to help feel free to call me as I am trying to get running before work tomorrow (Monday) morning. Thank you ALL!!!!
Nick
(785) 764-5948
Nick
(785) 764-5948
hey,
those codes means there is a open circuit (no connection somewhere, wires cut, pins not making contact...) P1237 injector #1 and P1242 injector #6, make sure they are well connected and well inserted cuz as soon there's no contact those codes will apear...
good luck and let us know
those codes means there is a open circuit (no connection somewhere, wires cut, pins not making contact...) P1237 injector #1 and P1242 injector #6, make sure they are well connected and well inserted cuz as soon there's no contact those codes will apear...
good luck and let us know
Thread
Thread Starter
Forum
Replies
Last Post
saranaz
TT (Mk1) Discussion
30
Nov 20, 2007 07:19 PM
Zdrajca Polski
12v V6 Discussion
1
May 30, 2006 12:19 PM
