well now that CA registration is out of the way (see <a href="https://forums.audiworld.com/a4gen2/msgs/909413.phtml">here</a>), i can safely proceed with the installation of all the engine parts i've been stocking up for the last couple of months...

- Borg-Warner KKK KO4-015 Turbo-Charger:
<img src="http://images15.fotki.com/v231/photos/1/110342/2795901/K04015Turbo04-vi.jpg">

- Turbo Installation Kit:
<img src="http://images14.fotki.com/v249/photos/1/110342/2795901/TurboInstallationKit-vi.jpg">

- MTM Chip:
<img src="http://images15.fotki.com/v266/photos/1/110342/3131971/MTMChip-vi.jpg">

- MTM Injectors:
<img src="http://images14.fotki.com/v247/photos/1/110342/3131971/MTMInjectors-vi.jpg">

- ATP High Flow Exhaust Manifold:
<img src="http://images16.fotki.com/v271/photos/1/110342/3132152/ATPExhaustManifold01-vi.jpg">

<img src="http://images15.fotki.com/v263/photos/1/110342/3132152/ATPExhaustManifold03-vi.jpg">

- Manifold Installation Kit:
<img src="http://images15.fotki.com/v263/photos/1/110342/3132152/ExhaustManifoldInstallationKit-vi.jpg">

- Manifold Gasket:
<img src="http://images16.fotki.com/v270/photos/1/110342/3132152/OEExhaustManifoldGasket01-vi.jpg">

- Milltek High Flow Cat:
<img src="http://images16.fotki.com/v275/photos/1/110342/3132032/MilltekHighFlowCat02-vi.jpg">

<img src="http://images15.fotki.com/v262/photos/1/110342/3132032/illtekHighFlowCat200CellCore01-vi.jpg">

- HFC Installation Kit:
<img src="http://images15.fotki.com/v259/photos/1/110342/3132032/ltekHighFlowCatInstallationKit-vi.jpg">

- Carbonio Air Intake (2nd generation):
<i>no picture yet... forgot about it...</i>

- JetJockey's Turbo Intake Pipe:
<i>being made as we speak... well hopefully...</i>

i'll get the Avant on the dyno at StreetWerke this Friday afternoon to re-establish a "baseline" since the last dynos were done at Matrix and more importantly, the Avant is now running on 91 octane as opposed to 94 octane...

 

when your all done, that will be a nice setup!

 

sweet!

 

JJ is making a TIP for me as well. It looks like we are the last ones for a while.

 

thought that was you...

 

Yup, slowly gathering the necessary parts.

 

Nice !!!

 

That's a lot of engine loot. It might be wise to spread out the installs in case you turn a CEL.

 

is that manifold going to disperse heat properly without "fins" like the stock mani...?

 

nice go parts!